Nordic Pure 16x20x2M13+C-12 Merv 13 Plus Carbon Filter 12pk

Product Description

The NORDIC PURE 16x20x2M13+C-12 is a MERV 13 pleated air filter with an integrated activated carbon layer, designed for residential forced-air HVAC systems. The electrostatically charged synthetic media captures fine particulates including dust mites, mold spores, pollen, pet dander, smoke particles, and virus carriers. The activated carbon layer adsorbs odorous gases and volatile organic compounds (VOCs), helping maintain fresh indoor air quality. Each box contains 12 filters. The actual size of each filter is 15.5 x 19.5 x 1.75 inches, sized to fit a nominal 16 x 20 x 2-inch filter slot. Installed by HVAC technicians and knowledgeable homeowners alike.

This filter is suited for residential homes and light commercial spaces where both particulate control and odor reduction are priorities. It is well-matched for systems serving households with pets, allergy sufferers, or occupants sensitive to airborne contaminants. The filter is designed for standard forced-air furnace and air conditioning systems using a nominal 16 x 20 x 2-inch filter rack. Nordic Pure recommends replacing the filter every 30 to 90 days depending on indoor and outdoor conditions, and more frequently during home renovation or high-dust periods.

Key Features

• MERV 13 rating captures fine particulates including smoke, pollen, pet dander, mold spores, and virus carriers
• Activated carbon flat-panel layer adsorbs odors and VOC gases while maintaining airflow
• Electrostatically charged, hypoallergenic, and antimicrobial synthetic filter media inhibits bacteria and mold growth
• Heavy-duty, moisture-resistant beverage board frame with internal metal mesh support grid bonded to pleats
• MERV 13 performance is equivalent to MPR 2200-2400
• Made in the USA; sold in a 12-pack per box

Compatibility

Designed as a replacement for any forced-air furnace or air conditioning system that accepts a nominal 16 x 20 x 2-inch filter. Verify the actual opening size against the filter actual size of 15.5 x 19.5 x 1.75 inches before installation.

Installation Notes

Power down the HVAC system at the thermostat or disconnect before replacing the filter. Confirm airflow direction arrow on the filter frame aligns with system airflow toward the air handler or furnace. Filters should be replaced every 30 to 90 days under normal operating conditions; more frequent replacement is recommended in high-dust or renovation environments. Dispose of used filters per local waste guidelines.