Nordic Pure 16_1/2x22x1ExactCustomM10+C-6 Furnace Filter

Product Description

The NORDIC PURE 16_1/2x22x1ExactCustomM10+C-6 is a custom-cut, pleated MERV 10 plus carbon air filter designed for residential and light-commercial HVAC systems including central air conditioners and gas or electric furnaces. Sized to exact measurements of 16.5 x 22 x 0.75 inches, this filter is hand-fabricated to the dimensions specified at ordering. It captures over 85% of airborne particles between 3 and 10 microns while an activated carbon layer addresses common household odors. A reinforced two-part frame supports consistent airflow and structural integrity throughout the filter's service life. Licensed HVAC technicians and knowledgeable DIYers install this filter during routine maintenance cycles.

This filter fits residential forced-air furnace and air conditioning systems that require a non-standard opening size. Because the actual dimensions do not match any stock nominal size, it is produced as a custom unit by cutting or combining standard filter frames, with tape used as needed to achieve the specified measurement. Recommended replacement interval for this 1-inch thick filter is every 30 to 90 days depending on household dust load, pet dander levels, and local air quality conditions. This filter is sold in a pack of 6 to support multiple replacement cycles.

Key Features

• MERV 10 rating captures over 85% of particles between 3 and 10 microns, including lint, dust, pollen, pet dander, mold spores, and odors
• Activated carbon layer reduces common airborne odors for improved indoor air quality
• Custom-fabricated to exact dimensions of 16.5 x 22 x 0.75 inches - measure your current filter before ordering
• Reinforced two-part frame provides added durability and supports balanced, efficient airflow
• Low airflow resistance helps the HVAC system maintain rated efficiency throughout the filter life cycle
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and central air conditioning systems requiring an exact filter opening of 16.5 x 22 x 0.75 inches. Verify the actual opening size with a tape measure before ordering; custom-fabricated filters are not eligible for return.

Installation Notes

Installation is performed by a licensed HVAC technician or a knowledgeable service person following the system manufacturer's service procedures. Power down the furnace or air handler at the disconnect switch before removing the old filter. Confirm airflow direction arrow on the new filter frame aligns with the direction of airflow toward the blower. Because this is a 1-inch thick filter, replacement every 30 to 90 days is recommended; environments with high dust, pets, or occupancy may require more frequent changes.