Nordic Pure 15x30_3/4x1ExactCustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 15x30_3/4x1ExactCustomM10+C-6 is a custom-cut, pleated MERV 10 Plus Carbon air filter built to exact dimensions for residential and light-commercial HVAC systems. Each filter measures an actual 15 x 30.75 x 0.75 inches and is sold in a pack of six. The activated carbon layer targets odors alongside the pleated media, which captures over 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, mold spores, and lint. A reinforced two-part frame maintains structural integrity during the filter's service life. Licensed HVAC technicians and informed homeowners install this filter in forced-air furnace and air conditioning systems where a standard nominal size is not available.

This filter is designed for forced-air HVAC applications where the system's filter slot requires a non-standard opening that standard nominal sizes cannot fill. Typical scenarios include older residential furnace cabinets, custom return-air plenums, and light-commercial air handlers with atypical filter-bay dimensions. Nordic Pure manufactures this filter by cutting down or combining standard filter frames, using tape bonding where the size requires it. The 1-inch depth makes it suitable for single-filter slots in most residential air handlers and furnaces. At 0.75-inch actual depth, it seats flush in shallow filter tracks without restricting the door panel. Replacing filters every 30 to 90 days is recommended for 1-inch filters depending on household dust load and air quality conditions.

Key Features

• MERV 10 filtration captures over 85 percent of particles from 3 to 10 microns, including pollen, pet dander, mold spores, and lint
• Activated carbon layer absorbs household odors alongside particulate filtration
• Reinforced two-part frame provides double the structural durability for consistent airflow and shape retention
• Custom-cut to exact dimensions (15 x 30.75 x 0.75 inches actual) for non-standard filter bays
• Pack of 6 filters included per order
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for forced-air furnace and air conditioning systems requiring a non-standard filter size of 15 x 30.75 x 0.75 inches actual. Verify actual opening dimensions with a tape measure before ordering. Standard nominal-size filters will not substitute for this custom size.

Installation Notes

HVAC technicians and qualified homeowners install this filter. Power down or set the thermostat to the off position before replacing the filter to prevent unfiltered air from bypassing the media during the swap. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Because this is a custom-manufactured size, it is not eligible for return; measure the actual filter bay opening to the nearest 1/8 inch before ordering.