Nordic Pure 15x25x1ExactCustomM13-6 Merv 13 Filter 6pk

Product Description

The NORDIC PURE 15x25x1ExactCustomM13-6 is a custom-cut, pleated AC furnace air filter rated MERV 13, sold in a 6-pack. It is designed for residential and light-commercial HVAC systems where high-efficiency particulate filtration is required. The filter uses an electrostatically charged pleated media housed in a moisture-resistant beverage board frame to capture airborne contaminants on each air pass. At MERV 13, it captures over 90% of particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 micron. Licensed HVAC technicians and experienced DIYers install this filter in forced-air furnace and air conditioning systems. The nominal size is 15x25x1 with an actual size of 15 x 25 x 0.75 inches.

This filter is suited for residential homes and commercial spaces requiring enhanced indoor air quality. It targets lint, dust, pollen, pet dander, mold spores, smoke particles, bacteria, virus carriers, and smog. The MERV 13 rating is comparable to MPR 2200-2400 on proprietary scales used by other manufacturers. Nordic Pure recommends replacing this filter every 1 to 3 months under normal conditions. Households with pets or occupants with allergies may require more frequent changes. This custom size is hand-cut to the exact dimensions specified at order and is non-returnable.

Key Features

• MERV 13 rated filtration captures over 90% of airborne particles between 1 and 10 microns, and 50% to 70% between 0.3 and 1 microns
• Electrostatically charged pleated media attracts and holds fine particulates without promoting bacterial or mold growth on the filter surface
• Moisture-resistant beverage board frame with reinforced 2-part construction for balanced airflow and extended service life
• Custom-cut to exact dimensions of 15 x 25 x 0.75 inches for precise fitment in non-standard filter openings
• Sold as a 6-pack for multi-unit stocking or scheduled seasonal replacements
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential and light-commercial forced-air furnace and AC systems requiring a 15 x 25 x 0.75 inch actual-size filter slot. Measure the existing filter opening before ordering, as this is a non-returnable custom-made product.

Installation Notes

Installation is performed by a licensed HVAC technician or a qualified DIYer familiar with forced-air system maintenance. Power down the air handler or furnace at the disconnect or thermostat before removing the existing filter. Note the airflow direction arrow on the filter frame and orient the replacement filter so the arrow points toward the blower. Because this is a custom-cut size, confirm actual opening dimensions with a tape measure before ordering, as the nominal size printed on a filter may differ from its true dimensions.