Nordic Pure 15x25x1ExactCustomM10+C-6 Merv 10 Filter 6pk

Product Description

The NORDIC PURE 15x25x1ExactCustomM10+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 10 with activated carbon media. It is designed for residential and light commercial HVAC systems where precise fit is required and standard nominal sizes are not available. The filter uses electrostatically charged synthetic media combined with a carbon layer to capture airborne particulates and reduce odors in a single pass. Nominal size is 15x25x1; actual dimensions are 15 x 25 x 0.75 inches. Each order includes 6 filters. Licensed HVAC technicians and knowledgeable homeowners install this filter in forced-air furnace and air handler applications.

This filter is suited for residential forced-air heating and cooling systems where the return-air grille or filter rack requires a non-standard exact-fit size. The custom construction uses cut-down or combined filter frames, which may include reinforcing tape, to achieve the specified dimensions. The MERV 10 rating captures over 85 percent of airborne particles in the 3-10 micron range, including lint, household dust, pollen, pet dander, mold spores, and baking flour. The added carbon layer addresses common household odors. Recommended replacement interval is every 30 to 90 days depending on indoor and outdoor environmental conditions.

Key Features

• MERV 10 rating captures over 85 percent of particles between 3 and 10 microns, including pollen, dust, pet dander, and mold spores
• Activated carbon media layer reduces common household odors in addition to particulate filtration
• Electrostatically charged synthetic media attracts and holds airborne contaminants without significantly restricting airflow
• Exact custom sizing at 15 x 25 x 0.75 inches actual dimensions for return-air openings that do not accept standard nominal sizes
• Reinforced 2-part frame construction provides structural durability; may include tape on cut edges depending on final dimensions
• Made in the USA; sold in a 6-pack

Compatibility

Custom-made to exact dimensions for residential and light commercial forced-air furnace and air handler systems requiring a 15 x 25 x 0.75 inch actual filter size. Verify the actual opening dimensions of your filter rack or return-air grille before ordering. Custom sizes are non-returnable.

Installation Notes

Power down the HVAC system at the thermostat or disconnect before replacing the filter. Confirm airflow direction arrow on the filter frame aligns with the direction of air movement toward the blower. Because this is a custom exact-fit size, measure the existing filter or the filter rack opening carefully before installation; a proper fit prevents air bypass around the filter frame. Replace every 30 to 90 days or more frequently in high-dust or high-pollen environments.