Nordic Pure 15x24x1ExactCustomM12+C-6 Merv 12 Carbon Filter

Product Description

The NORDIC PURE 15x24x1ExactCustomM12+C-6 is a custom-made, pleated MERV 12 plus carbon air filter designed for residential and light-commercial AC and furnace systems. Built to exact dimensions of 15 x 24 x 0.75 inches, this filter delivers high-efficiency particulate and odor control in a single media. MERV 12 filtration captures over 90% of airborne particles between 3 and 10 microns and 80% to 90% of particles between 1 and 3 microns. The activated carbon layer addresses odors and gaseous contaminants. Licensed HVAC technicians and knowledgeable service pros specify this filter where both particulate and odor control are required in a single-inch filter slot.

This filter is suited for residential forced-air furnaces and central air conditioning systems with a 15 x 24 x 1 nominal filter slot. Because it is manufactured to exact dimensions, it is intended for installations where standard nominal sizing does not fit and a precise actual dimension is required. The 6-pack format supports a full service cycle without repeat orders. Filter life for 1-inch filters is typically 30 to 90 days depending on household conditions, air quality, and system runtime. Higher-dust or pet-occupied environments will trend toward the shorter end of that range.

Key Features

• MERV 12 filtration captures lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and viruses
• Activated carbon layer reduces household odors and gaseous contaminants
• Custom-cut to exact dimensions of 15 x 24 x 0.75 inches - not a nominal oversized frame
• Reinforced 2-part filter frame provides structural rigidity and supports consistent airflow
• Pack of 6 filters for extended service intervals without reordering
• Made in the USA

Compatibility

Designed for AC and furnace systems with a 15 x 24 x 1 nominal filter slot where the actual opening measures 15 x 24 x 0.75 inches. Because this is a custom-made product built to exact listed dimensions, verify the actual opening size with a tape measure before ordering. The actual width and length of your current filter should be within 1/8 inch of these dimensions; if not, a different custom size is required.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Power down the air handler or furnace at the disconnect before removing the existing filter. Confirm airflow direction arrow on the filter frame matches the direction of airflow into the blower. Because this is a custom-made filter, it is not eligible for return - measure the existing filter carefully before ordering and confirm the actual size, not the nominal size printed on the old filter frame.