Nordic Pure 15x17x1ExactCustomM13-6 Merv 13 Filter 6 Pack

Product Description

The NORDIC PURE 15x17x1ExactCustomM13-6 is a custom-cut, pleated MERV 13 air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioners. Sold in a 6-pack with a nominal size of 15x17x1 inches and an actual size of 15 x 17 x 0.75 inches, this filter is manufactured to exact dimensions and built with a moisture-resistant beverage board frame. The electrostatically charged filter media captures over 90% of airborne particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 microns, including dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. Licensed HVAC technicians and qualified service personnel install this filter as a direct drop-in replacement during routine maintenance.

This filter is suited for residential homes, apartments, and light commercial spaces where indoor air quality is a priority. It is especially appropriate for occupants with allergies, asthma, or sensitivity to airborne contaminants. Nordic Pure recommends replacing this filter every 1 to 3 months under normal conditions, or more frequently in households with pets or high dust loads. The custom sizing makes this filter well suited for non-standard filter bays that standard shelf-size filters do not fit. Because this product is made to exact dimensions, it is not returnable - verify actual opening measurements before ordering.

Key Features

• MERV 13 rated per ASHRAE standards - captures over 90% of particles from 1 to 10 microns and 50% to 70% of particles from 0.3 to 1 microns
• Electrostatically charged pleated media attracts and holds fine airborne particles without restricting airflow
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for added durability
• Custom-cut to exact nominal size of 15x17x1 inches (actual: 15 x 17 x 0.75 inches) for non-standard filter openings
• Media does not promote bacterial or mold growth on the filter surface
• Made in the USA

Compatibility

Custom-made to fit HVAC filter bays requiring a nominal 15x17x1 inch filter with an actual dimension of 15 x 17 x 0.75 inches. Verify the exact measured opening of your furnace or air handler filter slot before ordering, as this is a non-returnable custom size.

Installation Notes

Installation is typically performed by a licensed HVAC technician or qualified service professional. Before replacing the filter, shut down the HVAC system at the thermostat or disconnect switch to prevent unfiltered air from being drawn through the system during the swap. Confirm airflow direction arrows on the filter frame align with the direction of airflow in the duct or air handler. Follow the manufacturer-recommended replacement interval of 1 to 3 months, adjusting based on system usage and environmental conditions.