Nordic Pure 15x15x1ExactCustomM7+C-12 Merv 7 Carbon Filter

Product Description

The NORDIC PURE 15x15x1ExactCustomM7+C-12 is a custom-cut, pleated AC and furnace air filter rated MERV 7 with an integrated carbon layer, sold in a 12-pack. It is manufactured from electrostatically charged synthetic media that captures particles in the 3-10 micron range, including lint, household dust, pollen, pet dander, mold spores, and odors. The carbon component targets gaseous contaminants and odors that standard pleated filters miss. The actual dimensions are 15 inches x 15 inches x 0.75 inches, cut precisely to fit filter slots where standard nominal sizes do not apply. Licensed HVAC technicians and knowledgeable DIYers install this filter in residential and light-commercial forced-air systems.

This filter is intended for residential and light-commercial HVAC systems where a non-standard 15-inch by 15-inch by 1-inch nominal slot is present and no off-the-shelf standard size provides an adequate fit. Custom-cut filters of this type are commonly installed in air handlers, upflow and downflow gas furnaces, and multi-speed blower systems where a tight fit is required to prevent air bypass. Nordic Pure constructs this custom size by cutting down or combining standard filter frames, which may include taped seams. The result is dimensionally accurate filtration at the stated actual size of 15 x 15 x 0.75 inches. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor air quality conditions and system usage.

Key Features

• MERV 7 rating captures 50-70 percent of airborne particles between 3 and 10 microns, including pollen, dust, pet dander, and mold spores
• Integrated carbon layer adsorbs odors and gaseous contaminants not addressed by mechanical filtration alone
• Electrostatically charged synthetic media enhances particle capture without significantly increasing static pressure drop
• Reinforced 2-part frame construction provides added rigidity and supports consistent airflow over the filter service life
• Custom exact-cut to actual dimensions of 15 x 15 x 0.75 inches for tight fitment in non-standard filter slots
• Made in the USA

Compatibility

Designed for forced-air residential and light-commercial HVAC systems with a filter slot requiring a custom nominal size of 15 x 15 x 1 inch. Verify the actual opening dimensions before ordering, as custom-cut filters are not eligible for return. Confirm the actual slot accepts a filter with a 0.75-inch depth.

Installation Notes

Installation is performed by a licensed HVAC technician or a qualified DIYer familiar with forced-air system maintenance. Power down the air handler or furnace at the disconnect or breaker before removing the existing filter. Confirm airflow direction and install with the directional arrow on the frame pointing toward the blower. Because this is a custom-cut size, measure the actual filter slot carefully before installation to ensure proper fit and prevent air bypass around the filter frame.