Nordic Pure 15_1/2x29x1ExactCustomM14+C-6 Merv 14 Filter

Product Description

The NORDIC PURE 15_1/2x29x1ExactCustomM14+C-6 is a custom-made, pleated MERV 14 plus carbon air filter designed for residential and light commercial AC and furnace systems. Built to exact dimensions of 15.5 x 29 x 0.75 inches, this filter captures over 90% of airborne particles between 1 and 10 microns, and between 75% and 95% of particles in the 0.3 to 1 micron range. The activated carbon layer addresses odors alongside standard particulate filtration. HVAC technicians and homeowners with non-standard filter openings order this SKU when no off-the-shelf size fits the application. Each pack contains 6 filters.

This filter is suited for residential and light commercial forced-air HVAC systems where the filter slot does not match a standard nominal size. The 1-inch nominal depth fits most standard single-filter return-air grilles and air handler cabinets configured for 1-inch media. Because this is a custom-cut product, the exact nominal dimensions are 15-1/2 x 29 x 1 inches with actual dimensions of 15.5 x 29 x 0.75 inches. Installers should measure the existing filter or the filter slot carefully before ordering, as custom sizes cannot be returned. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 14 filtration captures over 90% of particles between 1 and 10 microns, including dust, pollen, pet dander, mold spores, smoke, bacteria, and fine particulate from coughs and sneezes
• Activated carbon layer reduces common household odors alongside particulate filtration
• Custom exact-size construction: hand-cut to the nominal dimensions entered at time of order, using 1-inch filter frames combined or trimmed as needed
• Reinforced 2-part frame provides structural support and maintains filter shape during airflow
• Low airflow resistance design helps reduce static pressure load on the blower motor
• Made in the USA

Compatibility

Designed as a custom exact-size replacement for residential and light commercial forced-air AC and furnace systems requiring a 15-1/2 x 29 x 1 inch nominal filter where no standard off-the-shelf size is appropriate. Verify actual slot dimensions before ordering.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Power down the air handler or furnace at the disconnect or breaker before removing the old filter. Insert the new filter with the airflow arrow pointing toward the blower. Because this is a custom-made product cut to exact dimensions, confirm the actual filter slot measurement with a tape measure prior to ordering - the actual filter dimension should fall within 1/8 inch of the slot opening. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days.