Nordic Pure 15_1/2x29x1ExactCustomM12+C-6 Merv 12 Filter

Product Description

The NORDIC PURE 15_1/2x29x1ExactCustomM12+C-6 is a custom-cut, pleated MERV 12 air filter with activated carbon media, sized to exact dimensions for residential and light-commercial HVAC systems. With an actual size of 15.5 x 29 x 0.75 inches, this filter is hand-fabricated to match non-standard filter openings where stock sizes will not fit. MERV 12 filtration captures over 90% of airborne particles in the 3-10 micron range and 80-90% in the 1-3 micron range, covering lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and viruses. The carbon layer addresses odors that standard pleated filters cannot. HVAC technicians and service pros install these in furnaces and air handlers where the return-air cabinet requires a custom nominal size.

This filter is designed for residential and light-commercial forced-air systems where the return-air opening does not accept a standard nominal filter size. It is built by cutting down or combining standard filter frames, with reinforced two-part construction and tape sealing as needed to achieve the listed dimensions. Recommended replacement interval is every 30 to 90 days for 1-inch filters, depending on local air quality and system runtime. The carbon media layer makes this filter well suited for installations in homes with pets, smokers, or elevated odor loads. This pack includes six filters.

Key Features

• MERV 12 filtration captures over 90% of particles in the 3-10 micron range and 80-90% in the 1-3 micron range, including pollen, mold spores, pet dander, smoke, bacteria, and viruses
• Activated carbon layer reduces common household odors that standard pleated media does not address
• Custom hand-fabricated to exact nominal dimensions using a reinforced two-part frame for structural integrity and consistent airflow performance
• Actual size 15.5 x 29 x 0.75 inches - verify current filter measurements before ordering, as custom sizes are not returnable
• High-efficiency media designed to maintain low airflow resistance, reducing unnecessary strain on blower motors
• Made in the USA

Compatibility

Custom-fabricated to the nominal size listed above for forced-air furnace and air handler return-air filter slots that require non-standard dimensions. Measure the actual opening in the filter cabinet before ordering. This size is not interchangeable with standard nominal filter sizes.

Installation Notes

HVAC technicians and qualified service pros should power down the air handler or furnace at the disconnect or thermostat before removing or installing filters. Confirm airflow direction arrow on the filter frame aligns with system airflow toward the blower. Because this is a custom-fabricated size, verify the actual cabinet opening dimensions match the 15.5 x 29 x 0.75 inch actual size to within 1/8 inch before installation. Custom filters are non-returnable once ordered, so measure carefully prior to purchase.