Nordic Pure 14x28x1ExactCustomM14-6 Merv 14 Filter 6 Pack

Product Description

The NORDIC PURE 14x28x1ExactCustomM14-6 is a custom-cut, MERV 14 pleated air filter designed for residential and commercial HVAC systems. Sized at an exact 14 x 28 x 0.75 inches, this filter captures over 90% of airborne particles between 1 and 10 microns and 75% to 95% of particles between 0.3 and 1 microns. Target contaminants include lint, dust, pollen, pet dander, mold spores, smoke, bacteria, viruses, and smog. The electrostatically charged filter media resists moisture, will not promote bacterial or mold growth, and is housed in a reinforced two-part beverage board frame built for durability. Licensed HVAC technicians and knowledgeable installers handle this type of replacement filter.

This filter is suited for both residential and light commercial HVAC applications including forced-air furnaces and central air conditioning systems. Because of its high filtration efficiency, MERV 14 restricts airflow more than lower-rated media. It is important to confirm that the HVAC equipment is rated to handle MERV 14 or higher before installation. It performs well in newer, high-efficiency systems designed for HEPA-level filtration demands. Nordic Pure recommends replacing filters every 1 to 3 months, or more frequently in environments with pets or occupants with allergies.

Key Features

• MERV 14 rating captures over 90% of particles from 1 to 10 microns and 75% to 95% of particles from 0.3 to 1 microns
• Exact actual size of 14 x 28 x 0.75 inches for precise fit in compatible filter slots
• Electrostatically charged pleated media attracts and holds fine airborne particles without promoting mold or bacterial growth
• Reinforced two-part beverage board frame provides structural durability and supports consistent airflow
• Custom-made to exact dimensions; sold as a 6-pack
• Made in the USA

Compatibility

Designed as a custom exact-size replacement for residential and commercial forced-air furnace and AC systems with a filter slot accepting a 14 x 28 x 0.75-inch actual-dimension filter. Confirm equipment MERV rating tolerance before installation, as this filter is rated MERV 14 and requires a system rated to handle MERV 14 or above.

Installation Notes

Installation is typically performed by a licensed HVAC technician or a qualified service professional. Always power down the HVAC system at the thermostat and the disconnect before removing or installing a filter. Verify airflow direction arrows on the filter frame align with the direction of airflow in the unit. Because this is a custom-made product cut to exact dimensions, measure the existing filter opening carefully before ordering, as custom sizes cannot be returned.