Nordic Pure 14x28x1ExactCustomM12+C-6 Merv 12 Filter 6pk

Product Description

The NORDIC PURE 14x28x1ExactCustomM12+C-6 is a custom-cut, pleated MERV 12 air filter with activated carbon, sized at an exact 14 x 28 x 0.75 inches for tight-fitting residential and light-commercial HVAC applications. Sold in a 6-pack, it is built from electrostatically charged synthetic filter media that captures over 90% of airborne particles in the 3-10 micron range and 80%-90% of particles in the 1-3 micron range. The carbon layer addresses odors in addition to particulate load. A reinforced 2-part frame supports structural integrity across the full filter service life. Licensed HVAC technicians and knowledgeable DIYers handle installation in forced-air furnace and air handler systems.

This filter is intended for forced-air heating and cooling systems where a non-standard slot depth or opening width requires an exact-cut filter rather than a nominal off-the-shelf size. The exact actual size of 14 x 28 x 0.75 inches makes it suited for units where a standard nominal 14x28x1 filter does not seat flush. The carbon-enhanced media layer provides additional odor reduction beyond what standard MERV 12 pleated filters offer, making it a practical choice for homes with pets, cooking odors, or light smoke exposure. The filter ships as a custom-made product in quantities of six.

Key Features

• MERV 12 rating captures over 90% of particles from 3-10 microns, including pollen, mold spores, pet dander, and dust mite debris
• 80%-90% capture efficiency for particles in the 1-3 micron range, including bacteria and fine smoke particles
• Activated carbon layer reduces common household odors beyond standard particulate filtration
• Electrostatically charged synthetic media maintains low airflow resistance to reduce strain on blower motors
• Reinforced 2-part frame construction provides added durability and consistent fit in the filter slot
• Exact actual size of 14 x 28 x 0.75 inches; custom-cut to fit non-standard openings
• Made in the USA

Compatibility

Designed as an exact-size custom replacement for forced-air furnace and air handler filter slots requiring a 14 x 28 x 0.75 inch actual-dimension filter. Verify the actual opening size with a tape measure before ordering, as this is a custom-made product and is not eligible for return.

Installation Notes

Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from passing through the system during the swap. Confirm the actual slot dimensions with a tape measure before installing, as even a small mismatch can allow air bypass and reduce filtration efficiency. Install with the airflow arrow on the filter frame pointing toward the blower. Nordic Pure recommends replacing this filter every 30-90 days depending on indoor air quality conditions and system run time.