Nordic Pure 14x22x1CustomM14-6 Merv 14 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 14x22x1CustomM14-6 is a custom-cut, MERV 14 pleated air filter designed for residential and light commercial HVAC systems. Supplied in a 6-pack, each filter measures 13.75 x 21.75 x 0.75 inches actual size. The electrostatically charged pleated media captures over 90% of airborne particles between 1 and 10 microns, and 75% to 95% of particles between 0.3 and 1 microns, including dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. The frame is constructed from moisture-resistant beverage board and features a reinforced 2-part design for added structural durability. Licensed HVAC technicians and qualified HVAC service professionals typically install or replace these filters.

These filters are suited for residential and commercial HVAC applications where high-efficiency filtration is required. MERV 14 is comparable to MPR 2800-rated filters and is best used in newer, high-efficiency systems engineered to handle filters rated MERV 14 and above, including systems that typically use HEPA-style filtration. Custom sizing is produced by cutting down or combining standard filter frames, and tape may be used depending on the dimensions. Nordic Pure recommends replacing filters every 1 to 3 months, with more frequent changes in homes with pets or occupants with allergies. These filters are rated to the nominal size 14x22x1 and are hand-made to exact dimensions at the time of order.

Key Features

• MERV 14 filtration captures over 90% of particles between 1 and 10 microns and 75% to 95% between 0.3 and 1 microns
• Electrostatically charged pleated media attracts and retains airborne particles without promoting bacterial or mold growth on the filter surface
• Moisture-resistant beverage board frame with reinforced 2-part construction for consistent airflow and structural integrity
• Custom-made to the exact nominal size 14x22x1; actual dimensions are 13.75 x 21.75 x 0.75 inches
• Pack of 6 filters; made in the USA

Compatibility

Designed for HVAC systems rated to accept MERV 14 or higher filters. Verify that your system is engineered to handle the increased airflow restriction associated with high-efficiency filtration at this MERV rating before installation. Always measure the actual opening in your air handler or filter slot and compare to the actual filter dimensions before ordering.

Installation Notes

Installation and replacement of HVAC air filters should be performed by a licensed HVAC technician or a qualified service professional. Always shut down the HVAC system at the thermostat and disconnect power at the breaker before accessing the filter compartment. Confirm airflow direction and install the filter with the airflow arrow pointing toward the blower. Because this is a custom-made product, measure the actual filter slot dimensions carefully before ordering, as these filters are non-returnable.