Nordic Pure 14x16x1CustomM7+C-6 Merv 7 Carbon Filter 6pk

Product Description

The NORDIC PURE 14x16x1CustomM7+C-6 is a custom-made pleated air filter combining MERV 7 mechanical filtration with an activated carbon layer for odor reduction. Designed for residential and light-commercial HVAC systems, this filter fits in standard furnace and air handler filter slots. The nominal size is 14x16x1 inches with an actual size of 13.75 x 15.75 x 0.75 inches. Each order ships as a 6-pack. The reinforced two-part frame supports consistent airflow while the carbon layer addresses common household odors alongside standard particulate capture. Licensed HVAC technicians and knowledgeable DIYers install this filter as a routine maintenance component in forced-air systems.

This filter is suited for residential forced-air heating and cooling systems where both particulate and odor control are priorities. The MERV 7 rating makes it appropriate for homes with pets, light dust, or pollen exposure. Because this is a custom-cut size, it is manufactured to the exact nominal dimensions listed and is not a stock standard size. Installers should verify the actual filter slot dimensions before ordering. The carbon media layer helps address cooking odors, pet smells, and light volatile compounds in addition to standard airborne particulates. Change intervals of 30 to 90 days are recommended for 1-inch filters depending on local air quality and occupancy conditions.

Key Features

• MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors alongside mechanical particulate filtration
• Reinforced two-part frame provides added structural durability and supports balanced airflow
• Custom-cut to exact nominal dimensions - actual size 13.75 x 15.75 x 0.75 inches
• Sold as a 6-pack for extended service intervals
• Made in the USA

Compatibility

Designed as a custom-size OEM-style replacement for residential and light-commercial forced-air furnace and air handler systems that require a 14x16x1 nominal filter slot. Verify actual slot dimensions before ordering, as custom sizes are non-returnable.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified DIYer as part of routine filter maintenance. Power down the air handler or furnace at the disconnect or thermostat before removing the old filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Replace 1-inch filters every 30 to 90 days depending on operating conditions and indoor air quality.