Nordic Pure 14_1/2x19x1ExactCustomM8+C-6 Merv 8 Carbon Filter

Product Description

The NORDIC PURE 14_1/2x19x1ExactCustomM8+C-6 is a custom-cut, pleated MERV 8 plus carbon air filter designed for residential and light commercial HVAC systems. Built to exact dimensions of 14.5 x 19 x 0.75 inches, this filter combines mechanical particle capture with an activated carbon layer to address both particulate loading and common household odors. It is sold in a 6-pack and is manufactured to order based on the dimensions listed. HVAC technicians and service professionals install this filter in furnaces and air conditioning systems where a non-standard opening requires a custom fit rather than a nominal stock size.

This filter is suited for residential forced-air systems where the filter opening does not match a standard nominal size. The custom construction uses cut-down or combined 1-inch filter frames, sometimes secured with tape depending on dimensions. MERV 8 filtration captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, mold spores, and odors. Recommended replacement interval for 1-inch filters is every 30 to 90 days depending on environmental conditions such as pets, dust load, and system runtime.

Key Features

• Custom exact-cut dimensions: 14.5 x 19 x 0.75 inches actual size to fit non-standard filter openings
• MERV 8 rated filtration captures 70 to 85 percent of particles between 3 and 10 microns, including pollen, dust, and pet dander
• Activated carbon layer reduces common household odors alongside particulate filtration
• Reinforced 2-part frame construction for added structural durability and consistent airflow support
• Made in the USA
• Sold as a 6-pack; recommended replacement every 30 to 90 days for 1-inch filters

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air furnace and air conditioning systems with a filter opening requiring actual dimensions of 14.5 x 19 x 0.75 inches. Measure the existing filter before ordering, as custom sizes are made to the exact dimensions specified and are not eligible for return.

Installation Notes

HVAC technicians should power down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Verify airflow direction marked on the filter frame aligns with the system airflow arrow before insertion. Because this is a custom-made product cut to exact dimensions, confirm actual opening measurements to the nearest 1/8 inch prior to ordering. Handle the filter frame carefully during installation to avoid flexing or compressing the pleated media.