Nordic Pure 13x20x1ExactCustomM12+C-12 Merv 12 Filter 12pk

Product Description

The NORDIC PURE 13x20x1ExactCustomM12+C-12 is a custom-cut, MERV 12 pleated AC and furnace air filter with activated carbon media, available in a 12-pack. Built from electrostatically charged synthetic filter media, it captures airborne particulates including lint, household dust, pollen, pet dander, mold spores, smoke, bacteria, and viruses. The carbon layer targets odors that standard pleated filters miss. At MERV 12 performance, it captures over 90% of particles between 3 and 10 microns and 80% to 90% of particles between 1 and 3 microns. Licensed HVAC technicians and knowledgeable homeowners install this filter in residential and light-commercial forced-air systems where precise sizing is required.

This filter is manufactured to exact dimensions of 13 x 20 x 0.75 inches, making it a custom-size product intended for filter housings that do not accept standard nominal sizes. It is suited for residential gas furnaces, heat pumps, and split-system air handlers where the return-air grille or filter rack requires a non-standard fit. The reinforced 2-part frame construction uses double-thickness framing to support consistent airflow and structural integrity over the filter service life. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor and outdoor air quality conditions.

Key Features

• MERV 12 electrostatic synthetic media captures over 90% of particles between 3 and 10 microns
• Activated carbon layer reduces common household odors that bypass standard pleated media
• Exact actual size of 13 x 20 x 0.75 inches for housings requiring custom-cut dimensions
• Reinforced 2-part frame provides added structural support and balanced airflow resistance
• Pack of 12 filters supports extended maintenance intervals without reordering
• Made in the USA from electrostatically charged synthetic filter media

Compatibility

Custom-made to the exact dimensions listed; designed for residential and light-commercial forced-air HVAC systems requiring a 13 x 20 x 0.75-inch filter. Measure the existing filter slot carefully before ordering, as this is a non-returnable custom size.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Power down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Confirm the actual slot dimensions with a tape measure before installing; the actual filter width and length should be within 1/8 inch of the housing opening. Follow local codes and the equipment manufacturer service instructions when accessing the filter compartment.