Nordic Pure 12x18x1M13MiniPleat-4 Merv 13 Mini Pleat Filter

Product Description

The NORDIC PURE 12x18x1M13MiniPleat-4 is a MERV 13 mini pleat air filter designed for residential and light commercial HVAC systems. Sold in a pack of four, each filter carries a nominal size of 12x18x1 inches and an actual size of 11.5 x 17.5 x 0.75 inches. The filter media is self-supporting synthetic polyester fiber housed in a moisture-resistant two-part beverage board frame. With 2.5 times more pleats than standard filters, the design increases usable surface area to capture finer particles while maintaining adequate airflow through the system. Licensed HVAC technicians and knowledgeable homeowners install this filter in forced-air furnaces and air handlers.

This filter is suited for residential and commercial forced-air HVAC applications where higher filtration efficiency is required. The MERV 13 rating makes it appropriate for environments with elevated concerns about airborne contaminants, including households with allergy sufferers, pet owners, or occupants sensitive to smoke and fine particulates. It is also a practical choice during renovation or construction activity when airborne debris levels are elevated. Nordic Pure recommends replacing the filter every 2 to 3 months depending on operating conditions and local air quality.

Key Features

• MERV 13 filtration rating, equivalent to MPR 1900-2200, captures fine particles including bacteria, smoke, pollen, pet dander, mold spores, dust mites, and virus carriers
• 2.5 times more pleats than standard filters, increasing particle capture surface area without significantly restricting airflow
• Actual size of 11.5 x 17.5 x 0.75 inches ensures precise fit in compatible filter slots
• Self-supporting synthetic polyester fiber media attracts and retains airborne particles
• Moisture-resistant two-part beverage board frame for structural integrity during the full service interval
• Manufactured in the USA

Compatibility

Designed as an OEM-style replacement for residential and light commercial forced-air furnaces and air handlers that accept a nominal 12x18x1-inch filter. Always verify your system accepts the actual size of 11.5 x 17.5 x 0.75 inches before installation.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Always shut down the furnace or air handler at the thermostat and disconnect power at the breaker before removing or installing the filter. Confirm the airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Do not operate the system without a filter installed, as unfiltered air can damage internal components.