Nordic Pure 12x12x1M16-6 Pleated Air Filter Merv 16 6-pack

Product Description

The NORDIC PURE 12x12x1M16-6 is a MERV 16 pleated air filter designed for residential and commercial HVAC systems where high-efficiency filtration is required. Rated MERV 16, it captures extremely fine particles including smoke, bacteria, mold spores, pet allergens, and ultrafine pollutants. The filter uses an expanded pleated media design that increases surface area for greater dust-holding capacity while maintaining low airflow resistance. A reinforced 2-part frame resists bending and bowing during service. Each order includes 6 filters. Licensed HVAC technicians and building maintenance professionals typically specify this filter tier for sensitive environments or occupants with respiratory concerns.

This filter is sized for air handlers, furnaces, and central air conditioning systems that accept a 12x12x1 nominal filter slot. The actual dimensions are 11.75 x 11.75 x 0.75 inches, which is the standard undersized cut for a snug fit in a nominal 12x12x1 filter rack. It is suited for both residential and light commercial applications where indoor air quality demands exceed standard MERV 8 or MERV 11 performance. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on environmental conditions and air quality loads such as pets, construction dust, or occupancy density.

Key Features

• MERV 16 rating captures smoke, bacteria, mold spores, pet allergens, and ultrafine particles
• Actual size 11.75 x 11.75 x 0.75 inches for precise fit in nominal 12x12x1 filter racks
• Expanded pleated media provides increased filtration surface area with low airflow resistance
• Reinforced 2-part frame resists bending, bowing, and wear over the filter service life
• Pack of 6 filters supports a consistent replacement schedule
• Made in the USA

Compatibility

Designed as a direct-fit replacement for residential and commercial HVAC systems requiring a nominal 12x12x1 air filter. Verify that your equipment filter slot accommodates an actual filter thickness of 0.75 inches before installation.

Installation Notes

HVAC technicians and building maintenance personnel should power down the air handler or furnace before removing the old filter and installing a new one. Confirm airflow direction arrow on the filter frame matches the direction of airflow toward the blower. Filters in high-particle environments should be inspected at 30 days and replaced no later than 90 days to prevent excessive pressure drop and blower strain. Dispose of used filters in a sealed bag to contain captured particulates.