Nordic Pure 10x25x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 10x25x1CustomM8-6 is a custom-made, MERV 8 rated pleated air filter sold in a 6-pack for residential and commercial HVAC systems. With a nominal size of 10x25x1 inches and an actual size of 9.5 x 24.5 x 0.75 inches, this filter fits a wide range of forced-air furnaces and air conditioners. The electrostatically charged filter media captures lint, dust, pollen, pet dander, mold spores, and other common airborne particles in the 3 to 10 micron range. The frame is constructed from moisture-resistant beverage board and features a reinforced 2-part design for added durability. Licensed HVAC technicians and experienced DIYers install this filter as a routine maintenance replacement.

This filter is suited for residential and light commercial forced-air HVAC applications where a balance of filtration efficiency and low airflow resistance is required. It is well-matched for households with pets or occupants sensitive to airborne allergens. The MERV 8 rating is comparable to MPR 800 filters from other rating systems, all benchmarked against the same ASHRAE efficiency criteria. Nordic Pure manufactures this as a custom size, cut to the exact nominal dimensions ordered, which may involve cut-down frames or taped joints depending on the final size. Filter replacement every 1 to 3 months is typical, with more frequent changes recommended in high-pet or high-allergen environments.

Key Features

• MERV 8 rated media captures 70 to 85 percent of airborne particles between 3 and 10 microns, including pollen, pet dander, lint, dust, and mold spores
• Electrostatically charged filter media attracts and holds unwanted particles without promoting bacterial or mold growth on the media surface
• Reinforced 2-part moisture-resistant beverage board frame delivers added structural durability over standard single-frame designs
• Custom-made to exact nominal dimensions - actual size 9.5 x 24.5 x 0.75 inches
• 6-pack quantity supports scheduled multi-month maintenance stock
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement pleated air filter for residential and commercial forced-air furnaces and central air conditioning systems that accept a 10x25x1 nominal filter size. Verify actual filter cavity dimensions against the actual size of 9.5 x 24.5 x 0.75 inches before ordering. Custom-made filters are not returnable.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Always shut down the HVAC system at the thermostat and disconnect power at the breaker before removing or inserting a filter. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom-cut size, measure the actual filter slot dimensions carefully before ordering, as custom sizes cannot be returned.