Nordic Pure 10x20x1M13+C-6 Merv 13 Plus Carbon Filter 6 Pack

Product Description

The NORDIC PURE 10x20x1M13+C-6 is a MERV 13 pleated air filter with activated carbon, sold in a 6-pack. The filter media is electrostatically charged synthetic material rated MERV 13, capturing fine airborne particulates including dust mites, mold spores, bacteria, pet dander, pollen, smoke particles, and virus carriers. A flat activated carbon panel is bonded to the assembly to adsorb odorous gases and volatile organic compounds (VOCs), helping to neutralize household odors. The nominal size is 10x20x1 inches with an actual size of 9.5 x 19.5 x 0.75 inches. Licensed HVAC technicians and knowledgeable homeowners install this filter in residential forced-air heating and cooling systems.

This filter suits residential HVAC applications where both high-efficiency particulate capture and odor control are required. It is appropriate for homes with pets, smokers, or occupants with allergies or respiratory sensitivities. The MERV 13 rating makes it suitable for systems that can handle moderate-restriction filter media. NORDIC PURE rates this filter equivalent to MPR 2200-2400. Each filter in the 6-pack is sized for standard 10x20x1 filter slots in furnaces, air handlers, and return-air grilles. Replacement is recommended every 30 to 90 days depending on indoor and outdoor air quality conditions.

Key Features

• MERV 13 electrostatically charged synthetic media captures fine particulates including mold spores, bacteria, pet dander, pollen, and smoke particles
• Activated carbon flat panel adsorbs VOCs and unwanted household odors
• Hypoallergenic, antimicrobial filter media inhibits bacterial and mold growth on the filter surface
• Heavy-duty moisture-resistant beverage board frame with bonded metal mesh support grid for structural integrity
• Equivalent to MPR 2200-2400 rated filters
• Proudly made in the USA

Compatibility

Designed as a standard replacement pleated air filter for residential forced-air furnaces, air handlers, and HVAC systems accepting a nominal 10x20x1 inch filter. Actual installed dimensions are 9.5 x 19.5 x 0.75 inches; verify the actual slot dimensions before installation.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified homeowner. Power down the air handler or furnace at the disconnect or breaker before removing the existing filter. Note the airflow direction arrow printed on the filter frame and orient the replacement filter so the arrow points toward the blower. Measure the actual filter slot dimensions before ordering to confirm fit, as nominal and actual filter sizes differ.