Nordic Pure 10x18x1ExactCustomM8-6 Merv 8 Air Filter 6 Pack

Product Description

The NORDIC PURE 10x18x1ExactCustomM8-6 is a custom-cut, pleated HVAC air filter rated MERV 8, supplied in a 6-pack. The actual dimensions are 10 x 18 x 0.75 inches, custom manufactured to those exact measurements. The electrostatically charged pleated media captures lint, dust, pollen, pet dander, mold spores, dust mites, and bacteria as air passes through. The frame is constructed from a heavy-duty, moisture-resistant beverage board rated for residential and light commercial HVAC systems. Licensed HVAC technicians and knowledgeable homeowners typically handle filter replacement. MERV 8 filtration is comparable to MPR 800-rated filters on other manufacturer scales, all evaluated under the same ASHRAE particle-capture criteria.

This filter is designed for residential forced-air furnaces, central air conditioning systems, and air handlers where a 10 x 18 x 1 nominal filter slot is present. Because this is a custom exact-fit size, it is hand-cut to the dimensions specified at order and is intended for units where standard nominal sizing does not achieve a proper seal. It is particularly well suited for homes with pets or occupants who have allergies or respiratory sensitivities. Replacement every 1 to 3 months is typical, with more frequent changes recommended in high-dust or high-dander environments. Made in the USA.

Key Features

• MERV 8 rated - captures 70 to 85 percent of airborne particles between 3 and 10 microns, including pollen, pet dander, lint, and mold spores
• Actual size 10 x 18 x 0.75 inches, custom-cut to exact dimensions for a proper seal in non-standard filter slots
• Electrostatically charged pleated media attracts fine particles without promoting bacterial or mold growth on the filter surface
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for durability and consistent airflow support
• Low airflow resistance helps maintain HVAC system efficiency and reduces strain on the blower motor
• Manufactured in the USA; 6 filters per box

Compatibility

Designed as a custom exact-fit replacement for residential and light commercial forced-air furnaces and central air conditioning systems requiring a 10 x 18 x 1 nominal filter slot. Verify the actual opening dimensions before ordering, as this is a non-returnable custom-made item.

Installation Notes

Filter replacement is a routine HVAC maintenance task performed by licensed technicians or qualified homeowners. Power down the furnace or air handler at the thermostat and disconnect power at the breaker before opening the filter compartment. Confirm airflow direction and install the filter with the directional arrow on the frame pointing toward the blower. Because this is a custom exact-fit size, measure the existing filter opening carefully before ordering - custom filters are non-returnable.