Nordic Pure 10x15x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 10x15x1CustomM10+C-6 is a custom-cut, pleated MERV 10 Plus Carbon air filter designed for residential and light-commercial HVAC systems. It combines electrostatically charged synthetic filter media with an activated carbon layer to capture airborne particulates and reduce common household odors in a single pass. The filter carries a MERV 10 rating, meaning it captures over 85% of particles in the 3-10 micron range. Nominal size is 10x15x1, with an actual size of 9.5 x 14.5 x 0.75 inches. This six-pack is custom-made to order and is installed by HVAC technicians or knowledgeable homeowners during routine filter maintenance.

This filter is suited for forced-air gas furnaces, heat pumps, and central air conditioning systems that accept a 10x15x1 nominal filter slot. The custom sizing makes it appropriate for non-standard filter cavities where standard stock sizes do not fit. The activated carbon component targets odors from pets, cooking, and other common indoor sources alongside standard particulate filtration. Nordic Pure recommends a replacement interval of 30 to 90 days depending on indoor air quality conditions, occupancy, and local environmental factors. Because this is a custom-cut product, it is non-returnable - verify the actual opening dimensions before ordering.

Key Features

• MERV 10 rating captures over 85% of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors alongside particulate filtration
• Electrostatically charged synthetic media attracts and holds fine particulates without blocking airflow
• Reinforced 2-part frame construction provides durability and dimensional stability in the filter cabinet
• Custom-cut to 9.5 x 14.5 x 0.75 inches actual size for non-standard filter openings
• Made in the USA

Compatibility

Designed for residential and light-commercial forced-air HVAC systems requiring a 10x15x1 nominal filter size with a 9.5 x 14.5 x 0.75 inch actual opening. Verify actual cabinet dimensions before ordering, as this is a custom-made size and is not eligible for return.

Installation Notes

Filter replacement is a standard HVAC maintenance task performed by licensed HVAC technicians or qualified homeowners. Always shut down the air handler or furnace at the thermostat and disconnect power at the disconnect switch or breaker before opening the filter cabinet. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Dispose of the used filter in a sealed bag to prevent re-release of captured particulates.