Nordic Pure 10x12x1ExactCustomM8+C-6 Merv 8 Carbon Filter

Product Description

The NORDIC PURE 10x12x1ExactCustomM8+C-6 is a custom-cut, pleated MERV 8 Plus Carbon air filter designed for residential AC and forced-air furnace systems. Sold in a 6-pack, each filter is hand-fabricated to the exact dimensions you specify, with an actual size of 10 x 12 x 0.75 inches. The carbon layer targets odors while the MERV 8 media captures particles in the 3-to-10-micron range. Licensed HVAC technicians and experienced DIYers install these as direct drop-in replacements when a standard nominal size does not fit the filter housing. Recommended replacement interval is every 30 to 90 days for 1-inch filters.

These filters are suited for residential and light-commercial HVAC applications where a non-standard filter opening requires a custom-made solution. The 10 x 12 x 0.75-inch actual footprint fits filter housings that accept a nominal 10x12x1 size. The added carbon media makes this filter a practical choice for installations in homes with pets, cooking odors, or light volatile organic compound concerns. Because each filter is cut to order from the exact dimensions provided at purchase, this SKU is not returnable.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors and light gaseous contaminants
• Custom exact-cut construction ensures proper fit in non-standard or irregular filter housings
• Reinforced 2-part frame provides structural rigidity and supports consistent airflow over the filter life
• Pleated media design maintains low airflow resistance, reducing static pressure load on the blower
• Made in the USA; pack of 6 filters

Compatibility

Designed for residential and light-commercial forced-air furnace and AC systems requiring a custom nominal 10x12x1 filter with an actual size of 10 x 12 x 0.75 inches. Measure your existing filter to the nearest 1/8 inch before ordering to confirm fit.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified DIYer. Always shut down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Confirm airflow direction and install the new filter with the arrow on the frame pointing toward the blower. Because this is a custom-made product, verify exact dimensions with a tape measure before ordering, as the filter cannot be returned once fabricated.