Nibco tp-pvc-410007a Pvc Sch 40 90 Street Elbow 3/4 in

Product Description

The NIBCO tp-pvc-410007a is a PVC Schedule 40 90-degree street elbow with a male NPT (MIPT) threaded inlet and a female slip socket outlet. It redirects flow at a 90-degree angle in low-pressure piping systems and is rated for a maximum service temperature of 140 degrees F. The fitting is joined by solvent cement on the slip end and threaded connection on the male end. PVC Schedule 40 construction delivers high corrosion and chemical resistance while keeping installed weight low. It will not rust, scale, pit, or corrode. Licensed plumbers and irrigation installers are the primary trades that work with this fitting.

This street elbow is rated for cold water pressure distribution applications including potable water supply, irrigation, pool and spa systems, and chilled water systems. The 3/4 inch size fits within the NIBCO Schedule 40 PVC fitting range of 1/2 inch to 2 inches. It is not approved for use with compressed air or any other gas under pressure. Sold individually; available in bags of 10.

Key Features

• 90-degree street configuration with MIPT threaded inlet and slip socket outlet on a single compact body
• PVC Schedule 40 construction — ASTM D2466 and ASTM D1784 Cell Class 12454 compliant
• NSF/ANSI Standard 61 certified for potable water contact
• NSF Underwriters Pipework (U.P.) certified
• UL Listed 94V-0 flame classification
• Will not rust, pit, scale, or corrode in normal service conditions

Compatibility

Designed as an OEM-style replacement or new-install fitting for PVC Schedule 40 piping systems in the 3/4 inch size range, compatible with standard MIPT-threaded pipe and Schedule 40 slip-socket fittings used in residential and commercial irrigation, pool and spa, and cold water distribution applications.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation technician in accordance with applicable local plumbing codes and ASTM standards. Shut off system pressure and drain the line before cutting into an existing system. Use an appropriate Schedule 40 PVC solvent cement and primer on the slip connection; hand-tighten the MIPT threaded end with PTFE tape before applying final turns with a strap wrench. Do not use this fitting with compressed air, gas, or any non-liquid pressure medium.

Technical Specifications

• Material: Polyvinyl Chloride (PVC) Schedule 40
• Connection Type: 3/4 inch MIPT x Slip (socket)
• Angle: 90 degrees
• Maximum Service Temperature: 140 degrees F
• ASTM Standard: D2466, D1784 Cell Class 12454
• Certification: NSF/ANSI 61, NSF U.P. Certified, UL Listed 94V-0
• Size Range (Product Line): 1/2 inch to 2 inches
• Sold As: Each (available in 10-piece bags)

Standard Information

• Brand: NIBCO
• Manufacturer Part Number: tp-pvc-410007a