Nibco MA0112D 2 Inch Pvc Miniature Ball Valve Solvent

Product Description

The NIBCO MA0112D is a 2-inch miniature manual ball valve designed for PVC piping systems requiring reliable on/off flow control. Built from polyvinylchloride (PVC) in a 1-piece body construction, this valve connects via solvent x solvent ends and is rated for Schedule 40 pipe. The tee-style handle provides a positive grip for quick quarter-turn actuation. With a maximum working pressure of 2000 psi, the MA0112D is suited for demanding plumbing, irrigation, and industrial fluid-handling applications where a compact, lightweight valve is required. Licensed plumbers and pipefitters are the typical installers of this fitting class.

This valve is intended for use in Schedule 40 PVC piping systems where a solvent-weld end connection is specified. The standard port configuration maintains adequate flow for most residential and light commercial plumbing and irrigation layouts. The 2-inch pipe size fits a wide range of system configurations, from main distribution lines to branch isolation points. Its natural PVC color allows visual identification in clear-label installation environments. The compact 1-piece body keeps the installation footprint minimal in tight mechanical spaces.

Key Features

• 1-piece PVC body construction for a lightweight, corrosion-resistant assembly
• Solvent x solvent end connections compatible with Schedule 40 PVC pipe
• Maximum working pressure of 2000 psi for demanding service conditions
• Tee handle allows quick quarter-turn open/close operation
• Standard port design suitable for most flow-control applications
• Natural PVC color finish for easy visual identification in the system

Compatibility

Designed as an OEM-style replacement or new-installation valve for 2-inch Schedule 40 PVC solvent-weld piping systems.

Installation Notes

Installation of this valve should be performed by a licensed plumber following applicable IPC or local plumbing code requirements. Shut off system flow and depressurize the line before cutting in the valve. Solvent-weld both ends using PVC primer and cement rated for the pipe schedule and fluid service. Allow full cure time per the cement manufacturer instructions before restoring system pressure.