Ndl Industries np-406-007 90 Deg Pvc Elbow 3/4 in Socket

Product Description

The NDL INDUSTRIES np-406-007 is a 90-degree PVC pipe elbow designed to redirect flow at a right angle in pressure piping systems. Built from Schedule 40 PVC, this fitting accepts 3/4-inch socket connections on both ends, allowing solvent-cement joining to standard PVC pipe. It is a standard component in residential and light commercial plumbing, irrigation, pool and spa piping, and HVAC condensate drain lines. Plumbers, pool technicians, and irrigation contractors install this type of fitting as part of new construction or repair work on PVC piping systems.

This elbow is suited for a wide range of low-to-medium pressure piping applications where a 90-degree directional change is required. The socket-by-socket configuration accepts 3/4-inch PVC pipe on each end and is compatible with standard Schedule 40 PVC systems used in residential plumbing, pool equipment plumbing, and irrigation distribution networks. It performs reliably in both above-ground and buried installations where PVC is the specified material.

Key Features

• 90-degree turn geometry for right-angle pipe routing
• 3/4-inch socket on both ends for solvent-cement joining
• Schedule 40 PVC construction for durability in standard-pressure applications
• Lightweight and corrosion-resistant material suitable for water service
• Compatible with standard 3/4-inch Schedule 40 PVC pipe

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard 3/4-inch Schedule 40 PVC piping systems in plumbing, pool, irrigation, and HVAC condensate applications.

Installation Notes

Installation is performed by a licensed plumber or qualified technician following applicable IPC or local plumbing code requirements. Shut off the water supply and relieve system pressure before cutting into an existing line. Use appropriate PVC primer and solvent cement per the fitting manufacturer and local code; allow full cure time before pressurizing the system. Do not use solvent-cement fittings with threaded or push-fit adapters without the correct transition fitting.

Technical Specifications

• Fitting Type: 90 Degree Elbow
• Connection Size 1: 3/4 inches
• Connection Size 2: 3/4 inches
• Connection Type: Socket x Socket
• Material: PVC
• Schedule: SCH 40

Standard Information

• Brand: NDL INDUSTRIES
• Manufacturer Part Number: np-406-007