Ndl Industries np-300-3356 Pvc Dwv 90 Elbow 2 Inch Sch 40

Product Description

The NDL INDUSTRIES np-300-3356 is a 2-inch Schedule 40 PVC DWV short-radius 90-degree elbow designed for drain, waste, and vent piping systems. It uses a hub x hub end connection, accepting 2-inch pipe on both ends. The short-radius geometry suits tight-clearance installations where a long-sweep fitting will not fit. At 0.256 pounds, it is lightweight and easy to handle. Licensed plumbers and pipefitters install this fitting using standard solvent-cement technique per applicable code. It is manufactured from PVC conforming to ASTM D2665 and related standards, and is listed under NSF and IAPMO certifications.

This elbow is suited for residential, commercial, and industrial DWV piping applications. It is also listed for HVAC and refrigeration drain applications where PVC Schedule 40 fittings are permitted by code. Typical uses include branch offsets in drain stacks, horizontal-to-vertical transitions, and condensate drain lines requiring a sharp directional change. The hub x hub socket design accepts solvent-welded joints on both ends, making it compatible with standard 2-inch PVC DWV pipe.

Key Features

• Short-radius 90-degree sweep for tight-clearance drain and vent routing
• Hub x hub end connections accept solvent-cement joints on both ends
• Schedule 40 PVC construction per ASTM D2665, D2265, D3311, D1784, D2949, and F1498
• NSF and IAPMO listed for residential, commercial, and industrial DWV use
• Lightweight at 0.256 pounds for easy one-hand positioning during install
• Suitable for HVAC and refrigeration condensate drain lines where PVC is code-permitted

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 2-inch Schedule 40 PVC DWV piping systems in residential, commercial, and industrial applications. Listed for use in HVAC and refrigeration drain service as well.

Installation Notes

Installation is performed by a licensed plumber or pipefitter in accordance with IPC, UPC, or the locally adopted plumbing code. Shut off water supply and ensure the pipe is dry before solvent-cementing. Clean and deburr pipe ends, apply primer and solvent cement per the fitting manufacturer and ASTM standards, and hold the joint in place for the manufacturer-recommended cure time before restoring flow. Do not use this fitting for pressure piping applications outside its DWV rating.

Technical Specifications

• Size: 2 inches x 2 inches
• Angle: 90 degrees
• Type: Straight, Short Radius
• End Connection: Hub x Hub
• Schedule: 40
• Material: PVC
• Material Specification: ASTM D2265, D2665, D3311, D1784, D2949, F1498
• Weight: 0.256 pounds
• Certifications: NSF, IAPMO
• Application: Commercial, Industrial, Residential HVAC, Refrigeration, DWV

Standard Information

• Brand: NDL INDUSTRIES
• Manufacturer Part Number: np-300-3356