Ndl Industries NIPPLE1/4X10 Black Pipe Nipple 1/4x10

Product Description

The NDL INDUSTRIES NIPPLE1/4X10 is a standard black steel pipe nipple sized at 1/4 inch diameter by 10 inches in length. Pipe nipples are short threaded pipe sections used to connect fittings, valves, and equipment in fluid and gas piping systems. This nipple features NPT threads on both ends, allowing it to mate with standard threaded fittings. The black steel construction makes it suitable for gas, oil, and non-potable water piping applications. Plumbers, pipefitters, and HVAC technicians routinely use pipe nipples like this to extend runs or connect inline components during rough-in and service work.

This nipple is suited for residential and light commercial piping installations where a 1/4 inch threaded connection is required. Common applications include gas supply lines, compressed air distribution, and oil piping. The 10 inch length covers moderate extension requirements between fittings without requiring additional couplings. It is installed by hand-threading into compatible NPT fittings and tightening with a pipe wrench to a proper seal.

Key Features

• Standard black steel construction for gas, oil, and non-potable fluid service
• 1/4 inch nominal diameter with 10 inch overall length
• NPT threads on both ends for compatibility with standard threaded fittings
• Standard weight schedule for typical residential and light commercial piping

Compatibility

Designed as a standard NPT-threaded replacement or extension nipple for use with 1/4 inch threaded fittings in gas, oil, and non-potable water piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC) as required by application. Shut off the gas or fluid supply and verify zero pressure before breaking into any existing line. Apply an approved thread sealant or PTFE tape rated for the intended service medium before threading the nipple into fittings. Do not over-tighten, as this can crack fittings or distort threads.

Technical Specifications

• Nominal Diameter: 1/4 inch
• Length: 10 inches
• Thread Type: NPT both ends
• Finish: Black
• Schedule: Standard
• Weight: 0.00127 pounds

Standard Information

• Brand: NDL INDUSTRIES
• Manufacturer Part Number: NIPPLE1/4X10