Ndl Industries g300-3132-36 Flexible Gas Connector 36 in

Product Description

The NDL INDUSTRIES g300-3132-36 is a flexible stainless steel gas connector designed to link gas appliances to residential or light commercial gas supply lines. At 36 inches in length with a 5/8-inch outside diameter, it provides the reach and flexibility needed for a clean, code-compliant appliance hookup. The fittings are sized at 1/2-inch female pipe thread (FPT) on one end and 1/2-inch male pipe thread (MPT) on the other. Constructed from stainless steel and certified lead-free, this connector meets ANSI Z21.75/CSA 6.27 and ANSI Z21.24/CSA 6.10 standards, making it a suitable choice for new installations and appliance replacements.

This connector is intended for gas appliance installations where a flexible, corrosion-resistant line is required between the rigid gas supply piping and the appliance inlet. Typical applications include residential ranges, dryers, water heaters, and similar gas-fired appliances. The 36-inch length accommodates standard residential rough-in distances and allows for minor appliance repositioning without disturbing the gas supply stub-out. A licensed plumber or gas fitter typically performs this installation as part of an appliance hookup or service call.

Key Features

• 36-inch length with 5/8-inch outside diameter for flexible routing in tight spaces
• 1/2-inch FPT x 1/2-inch MPT end connections for standard appliance and supply line hookups
• Stainless steel construction resists corrosion and meets durability requirements for gas service
• Lead-free design complies with current health and safety regulations
• Certified to ANSI Z21.75/CSA 6.27 and ANSI Z21.24/CSA 6.10 standards
• Manufactured under ISO 9001 quality management standards

Compatibility

Designed as an OEM-style replacement or new-installation flexible gas connector for residential gas appliances using 1/2-inch threaded connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified gas fitter in accordance with applicable local codes and IFGC requirements. Shut off the gas supply at the service valve and verify pressure is relieved before disconnecting or connecting any gas line. Apply an approved pipe thread sealant or tape rated for gas service to all threaded connections. Do not kink, stretch, or use this connector as a permanent buried or concealed line.

Technical Specifications

• Length: 36 inches
• Outside Diameter: 5/8 inches
• End Connection: 1/2 inch Female Threaded x 1/2 inch Male Threaded
• Tubing Material: Stainless Steel
• Type: Gas Appliance Connector
• Lead-Free: Yes
• Applicable Standards: ANSI Z21.75/CSA 6.27, ANSI Z21.24/CSA 6.10, ISO 9001

Standard Information

• Brand: NDL INDUSTRIES
• Manufacturer Part Number: g300-3132-36