National Mfg N232-892 Zinc J-bolt 1/4 X 4 Inch 10 Pack

Product Description

The NATIONAL MFG/SPECTRUM BRANDS HHI N232-892 is a zinc-plated J-bolt designed for secure fastening in a wide range of mechanical and structural applications. The J-shaped hook end allows the bolt to wrap around or anchor into a support surface, while the threaded shaft accepts a standard nut for a firm, locked connection. Each bolt measures 1/4 inch in diameter and 4 inches in length. The zinc coating provides basic corrosion resistance for use in dry to mildly humid environments. This hardware is sold in bulk packs of 10 and is commonly installed by plumbers, HVAC technicians, and general contractors during rough-in or equipment-mounting work.

J-bolts in this size range are typically used to secure pipe straps, hang lightweight conduit or tubing supports, anchor equipment bases, or fasten structural components to wood framing or concrete forms. The 1/4 inch by 4 inch dimension suits standard residential and light commercial applications where a compact, threaded anchor point is required. These bolts are well-suited for situations where the installer needs to loop the J-hook around a rod, beam, or embedded anchor point before threading on a nut and washer to cinch the assembly.

Key Features

• J-hook profile allows wrap-around anchoring without drilling through the supported member
• Zinc plating provides corrosion resistance in dry and low-moisture environments
• 1/4 inch diameter threaded shaft accepts standard 1/4 inch nuts and washers
• 4 inch length suits typical residential framing and light commercial mounting depths
• Bulk pack of 10 units reduces per-unit cost for multi-point installations

Compatibility

Designed as a general-purpose 1/4 inch x 4 inch J-bolt for use with standard 1/4 inch nuts and washers in residential and light commercial fastening applications.

Installation Notes

Installation is typically performed by HVAC technicians, plumbers, or general contractors using standard hand tools. Ensure the anchor point or support structure is rated for the intended load before fastening. Apply a washer and nut to the threaded end and tighten securely, taking care not to over-torque and strip the zinc coating or threads. Follow all applicable local building codes and manufacturer guidelines for the equipment or assembly being supported.