National Mfg N220-673 Lag Screw Eye 0.25x5 in Zinc 120 Lb

Product Description

The NATIONAL MFG/SPECTRUM BRANDS HHI N220-673 is a zinc lag screw eye designed for overhead and lateral load-bearing fastening applications. The threaded lag shank drives directly into wood framing or structural members, providing a secure anchor point for hanging wire, rope, cable, hooks, or other suspended hardware. This fastener measures 0.25 inches in diameter and 5 inches in length, offering deep thread engagement for reliable holding strength. It carries a rated load capacity of 120 pounds. Installation requires no pre-installed insert or nut — the lag thread bites directly into the substrate. Trade pros and general contractors use this fastener in utility, mechanical, and structural hanging applications.

This lag screw eye is suited for residential and light commercial installations where a fixed loop anchor point is needed in wood. Typical applications include securing utility lines, suspending equipment, anchoring cable runs, or rigging support lines to joists, rafters, or wood blocking. The zinc finish provides basic corrosion resistance for dry interior and semi-protected environments. This item is sold in a bulk pack of 10 units per package.

Key Features

• 0.25 inch diameter x 5 inch length lag shank for deep wood engagement
• Rated load capacity of 120 pounds per fastener
• Zinc finish for corrosion resistance in interior and semi-protected environments
• Closed-loop eye design provides a fixed anchor point for wire, rope, or cable
• Lag thread drives directly into wood — no nut or insert required
• Bulk pack of 10 units per package

Compatibility

Designed for direct installation into solid wood framing, joists, rafters, and structural blocking in residential and light commercial construction applications.

Installation Notes

Installation is performed by driving the lag shank into a pre-drilled pilot hole sized appropriately for the 0.25 inch shank diameter to prevent wood splitting. A screwdriver, bar, or appropriate bit through the eye loop provides the torque needed to seat the fastener fully. Verify that the wood substrate is structurally sound and that the installation point can support the intended suspended load. Do not exceed the 120 pound rated load capacity.