Mueller Streamline PDWV4807-2-112 90 Degree Street Elbow

Product Description

The MUELLER STREAMLINE PDWV4807-2-112 is a 90-degree street elbow designed for PVC drainage, waste, and vent (DWV) piping systems. This fitting connects a spigot (SPG) end directly into a hub (H) fitting, allowing a direction change of 90 degrees without requiring an additional coupling. At 1-1/2 inches, it is a standard size used throughout residential and light commercial drain and vent rough-in work. Licensed plumbers and pipefitters install this type of fitting during new construction and remodel projects where compact, inline direction changes are required in gravity-drain or vent lines.

This street elbow is suited for residential and light commercial DWV applications, including sink drains, lavatory drains, and vent stack branches. The SPG x H configuration is common where back-to-back or tight-clearance installations require the male spigot end to insert directly into an adjacent hub, reducing overall assembly length compared to a standard elbow and coupling combination. It is not rated for pressure service or potable water supply lines.

Key Features

• 90-degree change of direction in a single DWV fitting
• Spigot (SPG) x Hub (H) end configuration reduces assembly length in tight spaces
• 1-1/2 inch size fits standard residential drain and vent lines
• Designed for gravity-drain and vent applications, not pressure service

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1-1/2 inch PVC DWV piping systems using solvent-cement joints per ASTM standards.

Installation Notes

Installation is performed by licensed plumbers in accordance with the International Plumbing Code (IPC) and applicable local amendments. Solvent-cement all joints using a PVC primer and cement rated for DWV service. Ensure the spigot end is fully seated into the hub before the cement sets, and allow adequate cure time before flowing water through the line. Do not use this fitting on pressurized supply lines or where temperature or chemical resistance beyond standard DWV service conditions is required.

Technical Specifications

• Size: 1-1/2 inches
• End Connection: Spigot (SPG) x Hub (H)
• Fitting Angle: 90 degrees
• Application: DWV (Drain, Waste, Vent)

Standard Information

• Brand: MUELLER STREAMLINE
• Manufacturer Part Number: PDWV4807-2-112