Mueller Streamline 6130 Pvc Dwv 90 Elbow 6 Inches

Product Description

The MUELLER STREAMLINE 6130 is a 6-inch PVC DWV hub-by-hub 90-degree elbow fitting designed for drain, waste, and vent piping systems. Manufactured from PVC to ASTM D2665, F1498, D331, and D1784 material specifications, it delivers strong chemical resistance and long-term corrosion resistance in demanding drain and waste applications. Smooth interior walls minimize scaling and support consistent flow through the fitting. Dimensional integrity is held to tight tolerances so the fitting seats correctly against mating hub connections without modification. Licensed plumbers and mechanical contractors install this fitting in residential and commercial DWV rough-in work.

This elbow is suited for 6-inch drain, waste, vent, sanitary, and industrial drainage piping where a 90-degree direction change is required. Its hub-by-hub end connections accept standard 6-inch PVC DWV pipe on both ends. The fitting meets NSF 14 and UPC standards, making it appropriate for potable-adjacent drain applications and jurisdictions that require UPC-listed DWV components. Mueller Streamline Co. serves as a national agent for CPF DWV, and this fitting is part of their comprehensive PVC DWV line.

Key Features

• 90-degree elbow geometry for direction changes in 6-inch DWV runs
• Hub x Hub end connections on both ends for solvent-weld assembly
• PVC construction resists chemicals and corrosion in drain and sanitary service
• Smooth interior walls reduce scaling and support free flow
• Meets NSF 14 and UPC standards for listed DWV installations
• Manufactured to ASTM D2665, F1498, D331, and D1784 material specifications

Compatibility

Designed for use with standard 6-inch PVC DWV pipe in drain, waste, vent, sanitary, chemical-resistant, and industrial drainage piping systems where NSF 14 and UPC compliance is required.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the applicable plumbing code, including IPC or UPC as adopted locally. Solvent-cement both hub connections using PVC DWV-rated primer and cement; follow manufacturer cure times before flowing water through the joint. Verify pipe is cut square, deburred, and dry before applying solvent cement. Support the fitting and connected pipe per code-required hanger spacing for 6-inch PVC DWV piping.

Technical Specifications

• Fitting Type: Elbow
• Angle: 90 degrees
• Size A: 6 inches
• Size B: 6 inches
• End Connection: Hub x Hub
• Material: PVC
• Material Specification: ASTM D2665, F1498, D331, D1784
• Applicable Standards: NSF 14, UPC
• Application: DWV, Sanitary, Industrial, Chemical and Corrosion Resistant Drainage

Standard Information

• Brand: MUELLER STREAMLINE
• Manufacturer Part Number: 6130