Mueller Streamline 1-1/8x50 Copper Refrigeration Tubing

Product Description

The MUELLER STREAMLINE 1-1/8x50 is a soft copper refrigeration tubing coil used in HVAC, refrigeration, and gas-distribution applications. The tubing measures 1-1/8 inches in outer diameter with a 0.050-inch wall thickness and comes in a 50-foot coil length. Soft temper copper allows the coil to be bent and routed without mechanical fittings at every change of direction, reducing potential leak points. Licensed HVAC technicians, refrigeration mechanics, and plumbers install this type of tubing for refrigerant line sets, natural gas supply lines, LP gas lines, and compressed air distribution.

This tubing is suited for residential and light commercial systems where a 1-1/8-inch OD soft copper coil is required. Common applications include refrigerant suction lines on larger split systems, replacement tubing runs in commercial refrigeration equipment, and gas-appliance supply lines where local codes permit copper. The 50-foot coil length provides enough material for most single-run installations without a field splice.

Key Features

• Soft temper copper construction allows field bending without a tubing bender for gradual curves
• 1-1/8 inch OD with 0.050-inch wall thickness suits refrigerant, gas, and compressed air service
• 50-foot coil minimizes mid-run joints, reducing leak potential
• Compatible with standard flare, sweat, and compression fittings sized for 1-1/8 inch OD tubing
• Suitable for natural gas, LP gas, and compressed air in addition to refrigeration use

Compatibility

Designed for use in air conditioning systems, refrigeration equipment, and gas-appliance installations requiring 1-1/8 inch OD soft copper refrigeration tubing. Suitable as replacement tubing where the application and local code allow copper.

Installation Notes

Installation should be performed by a licensed HVAC technician, refrigeration mechanic, or plumber in accordance with applicable mechanical and fuel-gas codes. Shut off and recover all refrigerant or isolate the gas supply before cutting or replacing any tubing segment. Use a sharp tubing cutter to produce a clean, square cut and ream the cut end before making any connection to prevent restricting flow. Sweat joints must be made with a nitrogen purge when used in refrigerant service to prevent internal oxidation scale.

Technical Specifications

• Outer Diameter: 1-1/8 inches
• Wall Thickness: 0.050 inches
• Length: 50 feet
• Material: Copper
• Package Weight: 5 pounds
• Package Dimensions: 27 inches x 27 inches x 3 inches

Standard Information

• Brand: MUELLER STREAMLINE
• Manufacturer Part Number: 1-1/8x50