Mueller Industries p3026 Pvc Dwv 90 Degree Street Elbow 6 in

Product Description

The MUELLER INDUSTRIES p3026 is a 6-inch PVC DWV 90-degree street elbow, also referred to as a quarter-bend, designed for drain, waste, and vent piping systems. The spigot-by-hub (SP x H) end configuration allows one end to insert directly into a standard hub fitting, eliminating the need for an additional coupling at that joint. This makes it a practical choice for tight-fit situations where a traditional elbow would require an extra fitting. Plumbers and pipefitters install this elbow in residential and light commercial DWV runs where a sharp 90-degree change of direction is required. The PVC construction resists corrosion and is well suited for non-pressurized drain and vent applications.

This street elbow is used in gravity-flow drain, waste, and vent piping systems. At 6 inches nominal size, it fits larger-diameter DWV trunk lines commonly found in residential main-stack assemblies, commercial restroom rough-ins, and floor drain tie-ins. The SP x H end configuration is a standard configuration in PVC DWV work and integrates directly with Schedule 40 DWV fittings and pipe of the same nominal diameter. It is part of the Mueller Industries Streamline series of DWV fittings.

Key Features

• 90-degree quarter-bend geometry for sharp direction changes in DWV piping
• Spigot x hub (SP x H) end configuration eliminates one extra coupling in a run
• 6-inch nominal size for large-diameter drain and vent trunk lines
• PVC material resists corrosion and chemical attack in drain service
• Part of the Mueller Industries Streamline series for consistent DWV fitting compatibility

Compatibility

Designed as an OEM-style replacement or new-installation fitting for PVC DWV piping systems requiring a 6-inch nominal, 90-degree street elbow with spigot x hub ends. No specific compatible model numbers were provided in the product data.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable plumbing codes, including the International Plumbing Code (IPC) where adopted locally. Shut off water supply and ensure the drain line is empty and dry before cutting into an existing system. Surfaces must be cleaned and properly primed before applying PVC solvent cement to ensure a watertight, code-compliant joint. Do not use this fitting in pressurized supply lines — it is rated for gravity-flow DWV service only.

Technical Specifications

• Nominal Size: 6 inches
• Type: PVC DWV Quarter-Bend Street Elbow
• End Configuration: Spigot x Hub (SP x H)
• Bend Angle: 90 degrees
• Material: PVC
• Series: Streamline

Standard Information

• Brand: MUELLER INDUSTRIES
• Manufacturer Part Number: p3026