Mueller Industries LSC4010P Copper Seamless Tube 5/8 in Od 10 Ft

Product Description

The MUELLER INDUSTRIES LSC4010P is a copper seamless tube designed for use in HVAC, plumbing, refrigeration, and general mechanical applications. This straight length tube measures 10 feet long with a 5/8 inch outside diameter, a 0.42 inch inside diameter, and a 0.04 inch wall thickness. The seamless construction eliminates longitudinal weld seams, providing uniform wall thickness and consistent dimensional tolerances throughout the length. Licensed HVAC technicians, plumbers, and pipefitters use this tube for refrigerant line sets, water supply runs, and process piping where leak-free joints and reliable pressure performance are required.

This tube is suited for residential and light commercial installations including refrigerant suction and liquid lines, hydronic heating systems, potable water distribution, and general copper piping applications. Its nominal 1/2 inch designation aligns with standard copper tube sizing conventions. Each unit ships as a single 10-foot straight length, making it practical for cut-to-length field work or shop fabrication where coil-set is not desirable.

Key Features

• Seamless copper construction for uniform wall thickness and consistent pressure integrity
• 5/8 inch outside diameter with 0.42 inch inside diameter and 0.04 inch wall thickness
• 10-foot straight length eliminates coil set, simplifying cut-to-length work
• Nominal 1/2 inch size fits standard copper fittings and swage connections
• Weight of 0.285 pounds per foot for straightforward material estimation on the job

Compatibility

Designed as an OEM-style and field-use copper tube for residential and commercial HVAC, plumbing, and refrigeration systems requiring 5/8 inch OD seamless copper straight-length tube.

Installation Notes

Installation should be performed by a licensed HVAC technician or plumber in accordance with applicable local codes, the International Mechanical Code, or the International Plumbing Code as appropriate. Isolate and depressurize any system before cutting into existing lines. Use a sharp tube cutter to achieve clean, square cuts and ream the cut end before soldering, brazing, or flaring. Avoid over-bending; use a proper tube bender to prevent kinking or wall deformation.