Mueller Industries LS06060 Seamless Copper Tube 7/8 in Od

Product Description

The MUELLER INDUSTRIES LS06060 is a seamless copper tube supplied in a 60-foot length, designed for use in refrigeration, HVAC, and plumbing applications where a leak-free, pressure-rated line is required. The tube measures 7/8 inch outside diameter with a 0.785 inch inside diameter and a 0.045 inch wall thickness. Seamless construction eliminates longitudinal seam welds, reducing the risk of pressure-related failures in high-cycle or high-vibration service. At 0.455 pounds per foot, the 60-foot coil weighs approximately 27.3 pounds. Licensed HVAC technicians and plumbers are the primary installers for this product type.

This seamless copper tube is suited for residential and light commercial HVAC refrigerant line sets, hydronic heating distribution, and potable water supply runs. The 7/8 inch OD corresponds to a 3/4 inch nominal size, a common dimension in split-system suction lines and chilled-water distribution piping. The coil format allows field cutting to exact lengths, reducing material waste on multi-zone or custom-routed installations. Applications requiring consistent bore dimensions and smooth interior surfaces, such as brazed refrigerant circuits, benefit from the tight dimensional tolerances of seamless tube.

Key Features

• Seamless construction provides uniform wall thickness and eliminates longitudinal weld seams
• 7/8 inch OD with 0.045 inch wall thickness meets standard refrigeration and plumbing line sizing
• 60-foot coil length reduces fittings and joints on long runs
• Copper material offers excellent thermal conductivity and corrosion resistance in wet and refrigerant environments
• 0.455 pounds per foot weight allows straightforward field handling and bending

Compatibility

Designed as an OEM-style and field replacement seamless copper tube for residential and light commercial HVAC refrigerant lines, hydronic systems, and plumbing applications requiring 7/8 inch OD copper tube at 3/4 inch nominal size.

Installation Notes

Installation should be performed by a licensed HVAC technician or plumber in accordance with applicable mechanical and plumbing codes, including IFGC and IPC where relevant. Shut off and recover all system refrigerant or isolate water supply before cutting into an existing line. Use a proper tube cutter to achieve a clean, square cut, and ream the bore to remove burrs before brazing or flaring. Do not over-bend the coil; use a tube bender appropriate for 7/8 inch OD copper to maintain wall integrity through curves.