Mueller Industries D 06010P Seamless Copper Tube 3/8 in Od

Product Description

The MUELLER INDUSTRIES D 06010P is a seamless copper tube manufactured from Alloy 122 copper, designed for use in plumbing, HVAC refrigerant lines, and fluid transfer applications. It measures 3/8 inch outside diameter with a 0.032-inch wall thickness and comes in a 10-foot length. The seamless construction eliminates weld seams, reducing the risk of leaks under pressure or vibration. Licensed plumbers, HVAC technicians, and pipefitters install this type of tube in both residential and light commercial systems where reliable, corrosion-resistant copper tubing is required.

This tube is suited for ACR (air conditioning and refrigeration) line sets, potable water distribution, hydronic heating, and fuel oil lines where Alloy 122 copper is specified. The 3/8-inch OD size is a common dimension in residential refrigerant suction and liquid lines, as well as in smaller domestic plumbing branch runs. The 10-foot straight length is appropriate for installations where coiled soft tube is not preferred and where rigid, pre-cut runs are being fabricated on site.

Key Features

• Seamless construction for consistent wall thickness and leak-resistant performance
• Alloy 122 copper material offers excellent corrosion resistance and solderability
• 0.032-inch wall thickness provides a balance of strength and workability
• 3/8-inch OD fits standard sweat, flare, and compression fittings designed for that size
• 10-foot straight length suits cut-to-length field fabrication

Compatibility

Designed as an OEM-style replacement and general-use straight copper tube for residential and light commercial plumbing, HVAC, and refrigeration installations requiring 3/8-inch OD seamless Alloy 122 copper tube.

Installation Notes

Installation should be performed by a licensed plumber or HVAC technician in accordance with local mechanical codes, the International Plumbing Code, or applicable refrigeration standards. Shut off water supply or recover refrigerant and de-energize the system before cutting or joining tube. Use a sharp pipe cutter to avoid deforming the tube end, and ream the cut edge before soldering, flaring, or swaging. Avoid over-bending, which can collapse the tube wall and restrict flow.