Mitsubishi Electric u01a07620 Indoor Heat Exchanger

Product Description

The Mitsubishi Electric u01a07620 is an indoor heat exchanger designed for use in HVAC systems where thermal transfer between refrigerant and conditioned air is required. The heat exchanger serves as the evaporator coil assembly within the indoor air handler, absorbing or releasing heat to condition interior spaces. At 9 pounds, this is a direct replacement component intended for installation by licensed HVAC technicians working on Mitsubishi Electric equipment. It is a core functional part of the refrigerant circuit and must be handled and installed with proper recovery and brazing procedures in mind.

This indoor heat exchanger is suited for residential and light commercial HVAC applications where the indoor coil requires replacement due to refrigerant leaks, physical damage, or system failure. It mounts inside the air handler or indoor unit enclosure and interfaces with the refrigerant lines and the blower assembly. Technicians should verify the specific system model before ordering to confirm fitment, as indoor heat exchangers are model-specific in coil geometry and connection size.

Key Features

• Indoor heat exchanger for HVAC refrigerant circuit thermal transfer
• OEM replacement part from Mitsubishi Electric
• Compact unit weight of 9 pounds for manageable handling during installation
• Designed for integration within the indoor air handler enclosure

Compatibility

Designed as an OEM-style replacement indoor heat exchanger for Mitsubishi Electric HVAC indoor units. Verify the system model number against Mitsubishi Electric parts documentation before installation to confirm direct fitment.

Installation Notes

Installation must be performed by an EPA 608-certified HVAC technician, as this component is part of the sealed refrigerant circuit. Recover all refrigerant from the system before removing the existing coil, in compliance with EPA regulations. Shut off all electrical power to the indoor unit at the disconnect before beginning any disassembly. After installation, pressure-test and leak-check all connections before recharging the system with the correct refrigerant type and charge.