Mitee-bite 26000 Serrated Steel Toe Clamp 4-40 8 Pack

Product Description

The MITEE-BITE 26000 is a standard-style screw mount toe clamp designed for precision workholding applications in machining and fabrication setups. Each clamp features a serrated edge surface that bites into the workpiece to resist lateral movement, paired with a 4-40 screw thread for low-profile mounting. The clamp body is 0.375 inches wide and 0.075 inches high, making it well suited for thin-stock and close-clearance fixtures. With a rated holding force of 650 pounds and a recommended torque of 16 inch-pounds, this clamp delivers repeatable clamping performance in tight quarters. Each package contains 8 clamps.

This clamp is used in machine shop environments where workpieces must be held securely against a fixture or tombstone with minimal vertical footprint. The low 0.075-inch profile keeps the clamp beneath most cutting paths, reducing interference with tooling. The 0.026-inch extension length and 0.0075-inch throw are optimized for fine-increment clamping, which suits precision milling, grinding, and EDM work. Machinists, toolmakers, and fixture builders are the primary installers. The 8-clamp package quantity supports single-setup fixture builds or stock replenishment for production environments.

Key Features

• Serrated edge surface grips workpiece to resist lateral shift during machining
• 650-pound holding force with 16 inch-pound rated torque
• Low-profile 0.075-inch clamp height minimizes tooling interference
• 4-40 screw thread for fine-threaded, small-format fixture mounting
• 0.0075-inch throw allows precise, repeatable clamping increments
• 8 clamps included per package for full fixture builds

Compatibility

Designed as an OEM-style standard screw mount toe clamp compatible with fixtures and mounting surfaces tapped for 4-40 screw thread patterns in precision machining and workholding applications.

Installation Notes

Installation is performed by machinists or toolmakers setting up milling, grinding, or EDM fixtures. Torque the mounting screw to the rated 16 inch-pounds using a calibrated torque driver — do not exceed the rated torque, as overtightening can damage the clamp body or distort the workpiece. Verify the serrated edge is fully seated against the workpiece before engaging the cut. Always de-energize or fully stop the machine spindle before adjusting or removing clamps.