Mitee-bite 10643 T-slot Fixture Clamp Set 12 Pc 3/8-16

Product Description

The MITEE-BITE 10643 is a 12-piece T-slot fixture clamp set designed for workholding applications on milling machines, machining centers, and other equipment fitted with T-slotted tables. Built from brass, this set provides the clamping hardware needed to secure fixtures and workpieces directly to T-slot tables using a 3/8-16 stud thread. The 9/16-inch T-slot size and 0.875-inch step block width make this set compatible with common machine table configurations. Machinists and CNC setup technicians rely on this type of set to achieve fast, repeatable fixturing without improvising individual components.

This set is suited for job shops, toolrooms, and production machining environments where T-slot workholding is standard practice. The included T-nuts, fixture clamps, and hex keys provide a complete out-of-the-box clamping solution for use on vertical mills, knee mills, and horizontal machining centers with 9/16-inch T-slots. The 1/4-inch T-slot nut width allows the nuts to slide and position freely within the slot before tightening.

Key Features

• 12-piece set includes 4 Mitee-Bite T-nuts, 6 Mitee-Bite fixture clamps, and 2 hex keys
• Brass construction for corrosion resistance and reduced galling against steel T-slots
• 3/8-16 stud thread matches common T-slot clamping hardware standards
• 9/16-inch T-slot size fits widely used machine table configurations
• Step block width of 0.875 inches for consistent clamping height adjustment
• T-slot nut width of 0.250 inches (1/4 inch) for smooth slot engagement

Compatibility

Designed for T-slotted machine tables with a 9/16-inch T-slot and 3/8-16 stud thread hardware. Verify your machine table T-slot dimensions before installation.

Installation Notes

Installation is performed by qualified machinists or CNC setup personnel. Before mounting or adjusting any fixture clamp, ensure the machine is powered down, the spindle is stopped, and all axes are locked or at a safe rest position. Slide T-nuts into the table slot before inserting studs, and hand-tighten before final torquing to confirm proper alignment. Do not overtighten brass T-nuts, as brass is softer than steel and can deform under excessive load.