Minwax 71032 Water Based Oil Modified Polyurethane Semi Gloss

Product Description

The MINWAX COMPANY, THE 71032 is a water-based, oil-modified polyurethane floor finish available in a semi-gloss sheen. It combines the durability of oil-based chemistry with the low odor and easy cleanup of a water-based formula. Designed for interior wood surfaces, this product dries quickly, reducing downtime between coats. The maximum VOC content is 275 grams per liter, keeping it compliant with many low-VOC application requirements. It is suited for professional contractors, flooring installers, and finish carpenters who need a durable topcoat with a manageable application process.

This polyurethane is intended for use on interior hardwood floors, stairs, trim, and wood furniture in residential and light commercial settings. The water-based formulation makes it practical for occupied spaces or areas where solvent odor is a concern. Its fast-drying characteristic allows multiple coats to be applied in a single workday, which helps keep projects on schedule. Cleanup requires only soap and water, eliminating the need for mineral spirits or other solvents on site.

Key Features

• Water-based, oil-modified formula delivers oil-like durability with lower odor
• Semi-gloss sheen suitable for floors, trim, and interior wood surfaces
• Ultra-fast drying reduces wait time between coats
• Maximum VOC of 275 g/L supports compliance in many regulated areas
• Easy water cleanup — no solvents required
• Available in 1-gallon containers, packaged 2 per case

Compatibility

Designed as an interior wood finish for use over bare, stained, or previously coated wood surfaces that have been properly prepared and are in sound condition.

Installation Notes

Application should be performed by a qualified flooring contractor or finish carpenter following the manufacturer's surface preparation guidelines. Ensure the work area is adequately ventilated even though odor is reduced compared to solvent-based products. Stir — do not shake — the product before use to avoid introducing bubbles into the finish. Allow each coat to dry fully before light sanding and applying subsequent coats.