Minwax 15210 Clear Satin Brushing Lacquer 11.5 Oz Aerosol

Product Description

The Minwax 15210 is a clear, satin-finish brushing lacquer in an 11.5 oz aerosol can, designed to apply a hard, protective topcoat over wood and metal surfaces. The fast-dry formula reaches a dry-to-touch state in 30 minutes and allows recoating in as little as 2 hours, making it well-suited for multi-coat finishing work where turnaround time matters. The formulation is VOC compliant in all states. Finishing contractors, cabinetmakers, and millwork shops use this product where a low-sheen protective lacquer finish is required without thinning or brush application setup.

This aerosol lacquer is used on finished or bare wood surfaces including furniture, trim, cabinets, and decorative metalwork. The satin sheen level delivers a smooth, non-glossy protective layer that resists wear and moisture. The aerosol delivery makes it practical for detail work, touch-ups, and smaller projects where spray equipment is not available. It is sold in cases of 6 units.

Key Features

• Clear satin finish lacquer for wood and metal surfaces
• Dries to touch in 30 minutes
• Recoat-ready in 2 hours, supporting efficient multi-coat schedules
• VOC compliant in all 50 states
• Aerosol format requires no brush, spray gun, or thinner
• 11.5 oz can size suitable for detail and touch-up work

Compatibility

Designed as a protective topcoat for bare or pre-finished wood and metal surfaces in residential and light commercial finishing applications.

Installation Notes

Apply in a well-ventilated area away from open flames or ignition sources, as aerosol lacquer is flammable during application and drying. Shake the can thoroughly before use and test spray on scrap material before applying to the finished workpiece. Follow all local regulations regarding aerosol and solvent-based coating disposal. Allow full cure before placing finished surfaces into service.