Minerallac 59736 Percussion Drill Bit 1/2 X 6 Inch

Product Description

The MINERALLAC 59736 is a percussion drill bit sized at 1/2 inch diameter by 6 inches in length, designed for rotary hammer and hammer drill applications in masonry and concrete work. This bit delivers reliable performance when drilling into block, brick, and poured concrete for anchor installation, conduit runs, and similar trade fastening tasks. At 0.3 pounds, it is lightweight enough for extended overhead or confined-space work. Electricians, plumbers, and HVAC technicians regularly reach for percussion bits like this when setting anchors or routing penetrations through structural masonry.

This bit is suited for residential and light commercial installations where tradespeople need to bore clean, accurate holes through concrete, block, or brick. Common applications include setting threaded rod anchors, drop-in anchors, and sleeve anchors for mechanical and electrical equipment supports. The 1/2 inch diameter matches standard anchor sizes used across multiple trades, making it a practical addition to any service van.

Key Features

• 1/2 inch diameter for standard anchor and fastener hole sizing
• 6 inch overall length provides adequate depth for most anchor installations
• Designed for percussion and rotary hammer drilling in masonry and concrete
• Lightweight at 0.3 pounds for reduced fatigue during extended use

Compatibility

Designed as a standard percussion drill bit compatible with rotary hammers and hammer drills accepting SDS or keyed chuck configurations in the 1/2 inch shank range, as appropriate for the tool type. Verify chuck compatibility with your specific tool before use.

Installation Notes

Licensed tradespeople should confirm hole depth and diameter requirements against the anchor manufacturer specifications before drilling. Always wear appropriate eye protection and hearing protection when operating percussion or rotary hammer equipment. Confirm the work surface is free of embedded conduit, rebar, or other obstructions using a detection tool before drilling. Follow applicable building and mechanical codes for penetration sealing and anchor load ratings.

Technical Specifications

• Diameter: 1/2 inch
• Length: 6 inches
• Weight: 0.3 pounds
• UPC: 08593759736

Standard Information

• Brand: MINERALLAC
• Manufacturer Part Number: 59736