Milwaukee Tool 48-39-0548 Bandsaw Blade 18 Tpi 1/2 in

Product Description

The MILWAUKEE TOOL 48-39-0548 is a bi-metal portable bandsaw blade designed for use in handheld portable bandsaws. It measures 1/2 inch wide and 0.02 inches thick, with a constant 18 teeth-per-inch (TPI) pitch pattern suited for cutting thin materials, conduit, pipe, and metal stock. The blade features high speed steel teeth bonded to a flexible alloy steel back, combining edge hardness with body flexibility to resist breakage during curved or tight-radius cuts. A raker tooth set and straight tooth form deliver consistent chip clearance in ferrous and non-ferrous metals. This blade is a direct replacement item for trades that cycle through blades regularly, including electricians, plumbers, pipefitters, and mechanical contractors.

This blade is used in portable bandsaw applications across residential and commercial job sites. It is well suited for cutting EMT, rigid conduit, copper and steel pipe, strut, and threaded rod. The 18 TPI constant pitch is optimized for thin-wall materials and smaller-diameter stock where a coarser blade would produce a rough cut or excessive burr. Trades that carry a Milwaukee portable bandsaw as a standard job-site tool will find this blade a straightforward drop-in replacement during routine blade changes.

Key Features

• 18 TPI constant pitch pattern optimized for thin-wall and small-diameter metal cutting
• Bi-metal construction with high speed steel teeth bonded to a flexible alloy steel back
• Raker tooth set with straight tooth form for consistent chip evacuation
• Flexible back resists blade fatigue and breakage under job-site conditions
• 1/2 inch blade width fits standard portable bandsaw tool heads
• 0.02 inch blade thickness for reduced kerf and smooth cut finish

Compatibility

Designed as an OEM-style replacement blade for Milwaukee portable bandsaws that accept a 1/2 inch wide blade. Verify blade length compatibility with your specific tool model before ordering.

Installation Notes

Blade replacement on a portable bandsaw should be performed by a qualified tradesperson with the tool unplugged or the battery pack removed. Follow the tool manufacturer's blade-change procedure for proper tensioning and blade-guide alignment. Inspect the blade guides and wheel surfaces for wear or debris before installing a new blade. Wear cut-resistant gloves when handling bandsaw blades, as the toothed edge presents a laceration hazard.