Milwaukee Tool 48-27-0941 Spade Blade Drill Bit

Product Description

The MILWAUKEE TOOL 48-27-0941 is a spade blade drill bit designed for boring large-diameter holes in wood and wood composites. It features a 15/16 inch cutting diameter and a 1/4 inch straight shank, making it compatible with standard drill chucks and quick-connect bit holders. The bit is manufactured from carbon steel and finished with a bright polished coating to reduce friction during cutting. Two spurs on the outer edges score the material ahead of the main blade, producing cleaner entry holes with reduced tearout. At 6-3/8 inches overall length, it provides adequate reach for typical framing and rough-in applications. Electricians and plumbers commonly use this bit for running wire and pipe through wood framing members.

This spade bit is suited for residential and light commercial rough-in work where large-diameter holes are needed through dimensional lumber, engineered wood, and similar materials. The wire fishing hole at the tip of the blade allows a pull wire or fish tape to be threaded through the hole after drilling, enabling wire and cable to be drawn back through the bore in a single operation. This feature is particularly useful for electricians working in new construction or retrofit installations where pulling wire through drilled framing is a routine task.

Key Features

• 15/16 inch cutting diameter for large-bore applications in wood framing
• 1/4 inch straight shank fits standard chucks and quick-connect holders
• Two spurs score material edges for cleaner, reduced-tearout entry
• Wire fishing hole at blade tip allows pull wire to be threaded after drilling
• Bright polished coating reduces friction and heat buildup during cutting
• 6-3/8 inch overall length provides reach for typical rough-in framing

Compatibility

Designed as an OEM-style spade bit for use with standard 3/8 inch or larger keyed and keyless drill chucks, as well as 1/4 inch hex quick-connect bit holders commonly used in cordless and corded drills.

Installation Notes

Installation is performed by electricians, plumbers, and general contractors during rough-in framing stages. Ensure the drill is powered off and the bit is fully seated in the chuck before operation. Maintain firm, steady pressure when drilling to prevent the bit from wandering at entry. When drilling near structural members, follow applicable building codes regarding minimum edge distances and hole sizing to preserve framing integrity.