Miller H7IC2A2 Full Body Safety Harness Universal

Product Description

The MILLER H7IC2A2 is a full body personal fall protection harness designed for workers operating at height in industrial, construction, and maintenance environments. Built from polyester webbing with a lightweight construction, this harness supports a load capacity of 420 pounds and a tensile strength of 5,000 pounds. It features dual D-ring attachment points at the back and front, giving riggers and safety managers flexibility in lanyard and self-retracting lifeline (SRL) configurations. The harness meets ANSI Z359.11, OSHA, and CSA Z259.10 standards, making it compliant for regulated worksites across the US and Canada.

The H7IC2A2 belongs to the Miller H700 series and is sized universally to fit a wide range of workers without requiring multiple SKUs on the jobsite. A one-pull trauma relief step addresses suspension trauma risk during post-fall hang time, a critical feature for worksites where rescue may be delayed. The configurable leg strap design and modular lightweight accessory straps allow customization for different task requirements. Suitable for residential and commercial construction, utility work, tower climbing, and industrial maintenance applications.

Key Features

• Dual D-ring locations at back and front for versatile lanyard and SRL attachment
• One-pull trauma relief step for suspension trauma mitigation during post-fall hang time
• Configurable leg strap design for adaptable fit across task types
• Modular lightweight accessory straps reduce fatigue during extended wear
• Polyester webbing construction rated to 5,000 pounds tensile strength
• Compliant with ANSI Z359.11, OSHA, and CSA Z259.10 standards

Compatibility

Designed for use with compatible lanyards, SRLs, and anchorage connectors meeting ANSI Z359 and OSHA 1926 Subpart M fall protection requirements. Part of the Miller H700 series fall protection system.

Installation Notes

Fall protection harnesses must be fitted and inspected by a competent person as defined by OSHA before each use. Power down or de-energize any equipment in the work area before donning or adjusting the harness when working near electrical hazards. After any fall event, remove the harness from service immediately and do not return it to use until it has been inspected per the manufacturer guidelines and applicable ANSI Z359 standards. Consult a qualified rigger or safety professional for anchorage point selection and system configuration.