Miller 913B/6FTGN Shock Absorbing Lanyard 6 Ft Green

Product Description

The MILLER 913B/6FTGN is a single-leg shock absorbing lanyard designed for fall arrest applications in general industry and construction environments. Constructed from polyester and Cordura nylon webbing, this lanyard measures 6 feet in length and is rated to a 5000-pound breaking strength. Both the anchorage end and harness end are fitted with locking snap hooks featuring a 3/4-inch gate opening. The integral shock absorber reduces peak arrest forces transmitted to the worker and anchor point during a fall event. Installation requires a qualified competent person and must comply with applicable OSHA fall protection standards.

This lanyard is suited for use in residential and commercial construction, industrial maintenance, and other work-at-height scenarios where a single-leg configuration meets the site fall protection plan. The green color aids visual identification on jobsites with multiple lanyard types in service. Locking snap hooks on both ends provide positive connection at the dorsal D-ring of a full-body harness and at a rated anchorage point capable of supporting required arrest loads.

Key Features

• 6-foot length with built-in shock absorber to reduce peak arrest forces
• 5000-pound breaking strength rated polyester and Cordura nylon webbing construction
• Locking snap hooks on both anchorage and harness ends for secure, positive connection
• 3/4-inch gate opening on snap hooks accommodates standard D-rings and anchorage hardware
• Single-leg configuration for straightforward tie-off at a single anchor point
• Green color for easy visual identification and lanyard management on site

Compatibility

Designed as an OEM-style replacement or direct-use shock absorbing lanyard compatible with full-body harnesses featuring a standard dorsal D-ring connection, for use with rated anchorage points meeting applicable fall protection load requirements.

Installation Notes

Installation and inspection must be performed by a competent person as defined under OSHA 29 CFR 1926.502 and applicable ANSI Z359 standards. Always inspect the lanyard, snap hooks, and shock absorber pack for damage, wear, or deployment before each use. Power down or de-energize equipment in the immediate work area where required by the job hazard analysis. A shock absorbing lanyard that has arrested a fall must be removed from service immediately and replaced.