Metabo 626407000 Spiral Sanding Band 400 Grit Zirconia Alumina

Product Description

The METABO 626407000 is a zirconia alumina spiral sanding band engineered for aggressive stock removal and fine finishing on metal surfaces. Rated at 400 grit, this band falls in the very fine grade category, making it well-suited for final-pass smoothing and surface prep work where a consistent, refined finish is required. The coated abrasive construction delivers durable cut performance throughout the life of the band. Sold in a package of 5, these bands are designed for use on drum sanders and oscillating spindle tools common in metal fabrication and finishing shops. The maximum operating speed is 6,400 RPM, a spec that must be observed to maintain safe operation.

This spiral band is intended for use on metal, rust-free steel, and stainless steel applications. It fits standard sanding drum setups used in metal fabrication, welding shops, and mechanical finishing environments. The band is suitable for deburring, blending welds, smoothing edges, and prepping surfaces before coating or passivation. Its very fine 400 grit makes it most appropriate as a finishing step following coarser stock-removal passes with lower-grit abrasives. Fabricators, machinists, and metalworkers are the primary users of this product type.

Key Features

• Zirconia alumina abrasive material for durable, consistent cut on metal
• 400 grit very fine grade for finish smoothing and surface prep
• Coated abrasive construction for extended service life
• Maximum operating speed of 6,400 RPM
• Compatible with metal, rust-free steel, and stainless steel workpieces
• Sold in a 5-piece package

Compatibility

Designed as an OEM-style replacement spiral sanding band for use with standard drum sander and oscillating spindle sander tooling rated for coated abrasive bands up to 6,400 RPM.

Installation Notes

Installation is performed by qualified metalworkers or tool operators familiar with abrasive drum sander setups. Always power down and disconnect the tool from its power source before mounting or removing a sanding band. Verify that the tool spindle RPM rating does not exceed the 6,400 RPM maximum rated speed of this band before use. Inspect the band for tears or separation before each use and do not operate a damaged abrasive band.