Metabo 623560000 Carbide Beveling Insert 0.402 in 10 Pack

Product Description

The METABO 623560000 is a replacement carbide insert designed for power beveling and deburring tools operating at a 45-degree cutting angle. Each package contains 10 carbide inserts sized at 0.402 inches, providing a consistent supply for production environments or field service work. Carbide construction delivers the hardness and wear resistance required for metal edge preparation on steel, aluminum, and similar materials. These inserts are consumed tooling, replaced as cutting edges dull during continuous beveling operations. Metalworkers, fabricators, and pipe fitters performing edge prep work will find these a direct replenishment item for their power beveling setup.

These inserts are suited for metal fabrication and pipe preparation applications where a clean, consistent 45-degree bevel or deburr is required. They are confirmed compatible with the METABO KFM 9-3 RF and KFM 18 LTX 3 RF power beveling tools. Typical use scenarios include structural steel fabrication, pressure pipe weld prep, and sheet metal edge conditioning. The 10-insert pack quantity suits both single-job restocking and ongoing shop inventory needs.

Key Features

• Carbide construction for extended cutting life on metal workpieces
• 0.402-inch insert size matched to KFM series beveling heads
• 45-degree cutting geometry for standard weld prep and deburring
• Pack of 10 inserts for convenient restocking
• Direct OEM replacement for METABO KFM 9-3 RF and KFM 18 LTX 3 RF tools

Compatibility

Confirmed compatible with the METABO KFM 9-3 RF and KFM 18 LTX 3 RF power beveling tools. Verify insert size and cutting head configuration before ordering for other METABO beveling tool models.

Installation Notes

Insert replacement should be performed by a qualified operator following the tool manufacturer's instructions. Disconnect or power down the tool completely before accessing the cutting head and replacing inserts. Use appropriate PPE including cut-resistant gloves when handling carbide inserts, as edges are sharp. Consult the tool's service manual for correct insert seating and fastener tightening procedure.